Please note this item is no longer available and you were redirected to our Archives.
Reversible, three quarter length, cotton/rayon blend construction, double breasted style parka with machine rolled splinter pattern camouflage in shades of green, tan and brown to the exterior. The parka features a large, overlapping, vertical, six button front closure with a smaller, overlapping, exterior, wind flap. The parka has two, slightly, diagonally angled, slash hip pockets with straight edged, button down flaps, positioned at either side of the front closure, at the waistline. The straight cut, dual-ply, sleeve cuffs each have a machine stitched, horizontal, tunnel loop with an inserted, horizontally extend, white and grey/green fabric, fit adjustment draw strap with a single button eyelet and dual corresponding fit adjustment buttons to each cuff. The sleeves each have a large, dual-ply, rectangular reinforcement panel to each elbow and buttons to both the inner and outer, upper sleeve seams, which were designed for wear of the identification armbands by front line troops. The parka has a single-ply, unpadded, integral hood, which is large enough to accommodate a helmet. The forward edge of the hood has four, small, evenly spaced, tapering darts and a machine stitched, tunnel loop with an inserted fit adjustment drawstring intact. The interior of the parka is fully lined in a silver/grey silky rayon, excluding the hood, but including the sleeves. There is a repair to the inside of the one sleeve under the arm. The interior of the parka has a machine stitched, horizontal, tunnel loop positioned at the waistline, with a small, vertical, slash positioned at either side of the front closure, with dual, inserted, horizontally extend, white and grey/green fabric, fit adjustment draw straps to each. Jacket shows wear and some soil to the front. There are a few holes to the one pocket area. Nice worn and used parka.
We would recommend that you read our Policies page before making a purchase.