Flags

Fahnenspitzen für Heer Standarte by the Kraas Foundry, Berlin 1942. The pole toper is constructed out of cast aluminum base with burnished backgrounds. It displays an Army eagle clutching a swastika in its talons on an ornate spade-shaped frame and cylindrical coupling. The coupling has two holes to either side near the base to allow it to be attached to ... Read and See More

Made entirely of silk with silver fringe on three sides. Cinnamon with a white disc on both sides, surrounded by a laurel wreath. In centre of the disc a silver-embroidered Luftwaffe eagle with extended wings stretching over the wreath and an Iron Cross, respectively. Four white diagonal rays with black edges widening towards the corners, which bear black silk swastikas ... Read and See More

Matching banner (48x48 cm) and flag (30x29 cm) are both double-sided bright red wool, multi piece construction with 4.5 cm silver/aluminum wire fringe on three sides. Applied to the obverse is the DAF national emblem with “Betriebszelle der Gothaer Waggonfabr.A.G.” embroidered in white cloth thread forming a ¾ circle around emblem with “Gotha” embroidered centrally underneath. Reverse has “Die ... Read and See More

Here we have a large NSDAP Party Flag that measures approximately 91" X 53". It is a double sided red with separately applied white roundels with crisply printed swastikas. There is very minor soil as well as two corners are frayed, like the Vet had this nailed up in his basement. All of the stitching remains intact! The colors remain nice and ... Read and See More

Wow here's a huge two sided banner. Measures approx 168" x 59". It has been cut off at both ends and they are straight but unfinished. The flag itself is fine with light soil/stain and one hole clearly shown near the roundel. The roundels are separately applied with crisp printed black swas's. There are 8 signatures in ink to the roundel, likely ... Read and See More

Measures approx 32"x 8" NOT including the gold bullion fringe or hanger. This suffers silk rot as shown with holes. It is fragile and will tear of not handled with care. Nice silver bullion chain stitching, "Gewidmet von der NSDAP Ortsgruppe Gechersheim" and "Sei treu und Deutsch" roughlt translated, Dedicated to the NSDAP Ortsgruppe Gechersheim Be loyal and German. The swas. ... Read and See More

Stunning sash attributed to Generaloberst Günther Korten on the occasion of his State Funeral. Really interesting story here you should ... Read and See More

Measures approx. 90" x 6" this shows minor soil and a few tiny holes toward the edges, there is a bullion fringe to both ends. Each end has a 4" separately applied roundel and printed silver words. The body of the sash is a silky material. These make for excellent borders to a grouping display. ... See More

This is truly a beautiful quality example of a National War Flag! It is difficult to find large flags in good shape. This piece is constructed of a cotton base that has been stitched together and printed in the national colors: red, black and white. The obverse of the flag depicts an off centered mobile swastika on a white round ... Read and See More

ReichsKriegsFlagge by N.V.P.F.v Vlissingen & Co's Katoenfabr. of Helmond (Holland). It is constructed out of a red, white and black printed cotton linen base. The obverse depicts an off centered black mobile swastika on a white roundel with four black/white strips running through it and a black pattée style cross to the top-hoist corner. The ... Read and See More

This one's a double sided printed red, white and black National War flag. It's made of a quality cotton. To the hoist end of the flag is a stitched on white reinforcing edge that has a lanyard running through the length of it, for easy mounting and dismounting. The white reinforcing edge has black printed markings that read: "Fl. 100x170" ... Read and See More

ReichsKriegsFlagge 100x170(cm). It is constructed out of a red, white and black printed cotton linen base. The obverse depicts an off centered black mobile swastika on a white roundel with four black/white strips running through it and a black pattée style cross to the top-hoist corner. The reverse depicts a mirror image of the obverse. The hoist ... Read and See More

"By order of (OTB43, No153 II) 24th Sept 1943 a pennant for the destruction of an enemy ship by units of the coastal defense was instituted. A triangular pennant was awarded for the destruction of a ship up to and including the size of a destroyer and a rectangular pennant with a cut out (swallow tail) was awarded for the destruction ... Read and See More

Here's a nicely marked national war flag that was used. If you look at the ends of the lanyard you can see witness marks where is was hung. As often happens with these when used the rain has shrunk the canvas at the lanyard end. It will stretch out fully if you pin it on display. It has a couple ... Read and See More

A true quality made State Service Flag 79"x 48" makes it a perfect size for display. It's in beautiful condition! Here we have a double sided red, white and black State Service flag. To the hoist end of the flag is a stitched on reinforcing corners with cloth loops that are for mounting. I'm guessing this was for indoor use on ... Read and See More

A large State Service flag direct from the vet's family! This flag is constructed out of red, white and black printed cotton material. The rectangular shaped obverse has a centrally placed roundel of a stagnant black swastika on a white base, the top left hand side is a black and white national eagle with outstretched wings clutching a wreathed mobile ... Read and See More

A beautiful NSDStB Student League Flag! It is constructed out of multi-piece died cotton that has been stitched together. The rectangular shaped obverse features a centrally placed NSDStB emblem, which consists of; a rhomboid shaped diamond with a black elongated mobile swastika that has alternating red/white backing to the arms. The emblem lies on two horizontal white strips all ... Read and See More

Roughly, 12" wide, horizontal, triangle, woven, dual-ply, Luftwaffe blue/grey cotton construction pennant features a nicely detailed, machine embroidered, second pattern Luftwaffe eagle in silvery/white threads with brown accent threads. The eagles wingspan is roughly, 7" from tip to tip.Complete with lanyard ... See More

Approximately 25" by 22 inches in size. Wool blend material with printed cross and circles. The Lanyard remains on the hoist edge. The flag has some spots and surface soiling from use as well as age toning. Overall very good condition. ... See More

Pennant for Kriegsmarine Officers. Nicely constructed in ribbed rayon with cotton border. The clips are quite correct. Real nice hand embroidered eagles with some wear. ... See More

Pennant for Kriegsmarine Officers. Nicely constructed in ribbed rayon with cotton border. The clips are quite correct. Real nice hand embroidered eagles. ... See More

A DDAC "Der Deutsche Automobil-Club" (The German Automobile-Club equivalent to AAA) Fahrzeug Dienst Wimpel. It is constructed out of a white cotton base that has been red and black printed and has a stitched on black leather hoist end. The triangular shaped obverse features a dual encircled national eagle clutching a mobile swastika (that is surrounded by a red circular ... Read and See More

It measures approximately: 34cm long and 22 cm tall (or nearly 13 1/2 inches long and 8 1/2 inches tall); it is two-sided, made of a Kriegsmarine dark blue background, and it is trimmed along the edges with gold tresse displaying swastikas, and centering finely executed, padded Kriegsmarine eagle embroidered using gold and dark brown threads. Overall, this pennant exhibits use and wear and yet ... Read and See More

NSDAP Dienstwimpel. It is constructed out of a red cotton linen base that has been stitched over a plated iron based frame. The square shaped obverse features a centrally placed black mobile swastika above a white roundel that is stitched to a red background. The reverse is the same as the obverse. The flag covers a frame that has two ... Read and See More

Inscibed "eiserne arbeit stähierne wehr plate sichern uns freiheit und ehr" translated roughly, iron work steel will secure us freedom and honor. Depicts an SS soldiers bust. Looks to be recast in plaster and painted. It has been broken and repaired and repainted. This has approx 9.75” diameter. ... See More

Approximately 25" by 22 inches in size. Wool blend material with printed cross and circles. The Lanyard remains on the hoist edge. The flag has some spots and surface soiling from use as well as age toning. Overall very good condition. ... See More

Fahnenspitzen für Heer Standarte by the Kraas Foundry, Berlin 1942. The pole toper is constructed out of cast aluminum base with burnished backgrounds. It displays an Army eagle clutching a swastika in its talons on an ornate spade-shaped frame and cylindrical coupling. The coupling has two holes to either side near the base to allow it to be attached to ... Read and See More

Fahne des Deutschen Reichskriegerbundes. This was the official banner of the Kyffhäuserbund until around 1934. It is constructed out of a red, black and white printed canvas-cotton base. The obverse features a centrally placed black Kyffhäuser monument on a white roundel and is on top of a black pattée style cross that is bordered in white and lays ... Read and See More

A double sided, printed, red pennant measuring approximately 80" x 48" featuring a 27" diameter central badge. The woman's division of the RAD organization pennant is unmarked and has a few holes. ... See More

Nice pennant here looks to marked up by the Vet to the obverse? says, "Dougway P.G". the the reverse it is chain stitched in the German period style. Very unusual separately applied Swas. with multi colored background. Measures approx 31" in length. Small stains. ... See More

"By order of (OTB43, No153 II) 24th Sept 1943 a pennant for the destruction of an enemy ship by units of the coastal defense was instituted. A triangular pennant was awarded for the destruction of a ship up to and including the size of a destroyer and a rectangular pennant with a cut out (swallow tail) was awarded for the destruction ... Read and See More

RCAF modern flag. Measures approx 70" x 35" with original price tag. ... See More

Nice burnished bronze plaque here is the perfect addition to your Imperial collection. Measured approx. 205mm x 170mm with 2 prongs to reverse. ... See More

Awesome Condor Legion flag bearer in silvered zinc. On chest is Spanish Military medal. Total height 39 cm, on a screw-threaded marble base, the standard is not original to the piece and a replacement, when, where, who I do not know. ... See More

WHW Communication Troops Swallowtail Standarte Flag Tinnie, introduced March 16-17th, 1940! This is one of a 20+ piece series of: “The Victorious Flags and Standards of the German Armed Forces” (Die Siegreichen Fahnen und Standarten der Deutschen Wehrmacht). It is constructed out of an injection molded grey bakelite base that has been silver washed and yellow and black painted. The obverse ... Read and See More

A very rare Kraft Durch Freude (KdF – Stength Through Joy) DAF Banner. It is constructed out of multi-piece died cotton base that have been stitched together. The rectangular shaped obverse features a centrally placed KdF emblem, which consists of a red mobile swastika, surrounded by a black cog wheel above a swirl (tire/spokes rotating) design. The emblem is above ... Read and See More

A beautiful NSDStB Student League Flag! It is constructed out of multi-piece died cotton that has been stitched together. The rectangular shaped obverse features a centrally placed NSDStB emblem, which consists of; a rhomboid shaped diamond with a black elongated mobile swastika that has alternating red/white backing to the arms. The emblem lies on two horizontal white strips all ... Read and See More

A neat piece! It is constructed out of a red silk base with stitched on silk/rayon insignia, silvered print and gold bullion fringe. The rectangular shaped obverse features stitched on white roundel with a black mobile swastika on it below “Die kameraden der” in silvered gothic print and to the other side is an Iron cross below “Fahrkolonne 8” in ... Read and See More

Nice condition pennant. It measures aaprox 84" by 46" (at the hoist end). It is super clean! The pennant is produced in smooth, red bunting and each side has a printed (mirror image reverse) female RAD motto. The hoist end has a lanyard sewn in that is looped at each end. Excellent condition! ... See More