Belt Buckles

Here's a nice aluminium, single piece, army belt buckle. The obverse depicts an embossed closed winged eagle griping a swastika in its talons. The eagle is above a half oak leaf and acorn wreath and underneath: "GOTT MIT UNS" (God with us). The wreath and motto are in front of a decorative line type pattern which is all encircled by ... Read and See More

A serviceable belt! It is constructed out of blackened/brown leather. One end has been folded over and stitched over an aluminum maker marked catch. The interior shows a stitched on tongue which is missing. It measures 100cm. It could use some show polish. ... See More

An worn belt. It is constructed out of a two pieces of blackened/brown leather. One end has been folded over and stitched over an aluminum catch marked with the OLC logo. The interior shows a stitched on tongue which has several puncture holes to it and wear. The tongue end is shortened a bit and it measures 83cm, so ... Read and See More

40" long black combat belt. The catch is brass based so I think this is WWI. Could use some spit and polish. ... See More

Heer Koppelschloß, introduced in 1937. It is constructed of two pieces of die stamped aluminum that have been silver washed. The obverse roundel depicts a closed winged Heer eagle griping a mobile swastika in its talons on a textured round background. The eagle is above a half oak leaf and acorn wreath that is tied together at the bottom and is ... Read and See More

A Reichswehr of the Weimar Republic Army Belt Buckle! This buckle would have been issued to the limited Weimar Republic 100,000 man army in the 1920's and early 1930's. The rectangle buckle is constructed of a die struck nickel base that has silver washed and black burnished. The obverse roundel depicts an embossed national Weimar Republic eagle on a round smooth ... Read and See More

Here we have a worn steel based, die struck, single piece, green painted tabbed army belt buckle. The obverse depicts an embossed closed winged Heer eagle griping a swastika in its talons. The eagle is above a half oak leaf and acorn wreath and underneath: "GOTT MIT UNS" (God with us). The wreath and motto are in front of a ... Read and See More

This is an green painted, single piece, die struck steel Army belt buckle. The front depicts the Heer closed winged eagle holding a swastika within its talons on a smooth background. This is then encircled by detailed lines enclosed by two twisted ropes. Above the eagle is the motto "GOTT MIT UNS" (God with us) and below the eagle is ... Read and See More

Black belt is functional with wear surface cracks and age. 95cm size. ... See More

Really nice set and well marked. ... See More

This rig was worn but just enough so you know it's real. Approx 45mm diameter, two piece die struck buckle with excellent details and correct pebbled background for the eagle. Front is slightly vaulted and crimped over the circular reverse plate. This buckle is unmarked. Included is a early war pattern brocade belt with a army green wool backing. The ... Read and See More

Title: Collecting Third Reich Belt Buckles a Russian Perspective. Author: Vladimir B Ulyanov. Publisher: Ulric Publishing. Date: 2002. Paperback. ... See More

Title: Deutsche Militär Koppelschlösser, German Military Waistbelts: A Collectors Handbook of Buckles & Belts Author: Terence Baldwin Publisher: Klaus D. Patzwall Date: 1984. Hardcover. Written in both German & English. There are 5 detached pages, that still remain with the book. ... See More

Title: Third Reich Belt Buckles: An Illustrated Handbook and Price Guide Author: Bob Evans Publisher: Schiffer Publishing Ltd. Date: 1999. Paperback. ... See More

An East German Army EM/NCO's Belt Buckle. It is made of a die stamped steel base, that is grey enamel painted. The box buckle obverse has a pebbled outer field, while depicting the East German ensign. The reverse has a dual post and catch system, and is brenlack coated. The buckle measures 2 9/16 inches wide by 2 inches tall. Cool! ... See More

A beautiful piece! It is constructed of two pieces of die stamped/struck aluminum-alloy that have been silver washed. The obverse roundel depicts a closed winged Heer eagle facing left griping a mobile swastika in its talons on a textured round background. The eagle is above a half oak leaf and acorn wreath that is tied together at the bottom ... Read and See More

Here we have an alloy based, die struck and officers open claw belt buckle it would be for a 45mm belt. The obverse shows a pebbled square buckle with two prongs. This is an unmarked example and could have been used on military or political coats. ... See More

Here we have an Imperial Prussian Army Belt Buckle. The two piece belt buckle is constructed out of a die struck, brass/nickel base that has been silver washed and gold gilded. The front silvered roundel depicts the Imperial king's crown which is then encircled by detailed lines and enclosed by two twisted ropes. The crown is above a laurel ... Read and See More

Here we have an alloy based, die struck and officers open claw belt buckle it would be for a 55mm belt. The obverse shows a pebbled square buckle with two prongs with silver wash. This is an unmarked example and could have been used on military coats. ... See More

Here we have an Imperial Prussian Army Belt Buckle. The two piece belt buckle is constructed out of a die struck, brass/nickel base that has been personalized, "Vary Mard"?, really not sure but looks quite period to me. The front silvered nickel roundel depicts the Imperial king's crown which is then encircled by detailed lines and enclosed by two ... Read and See More

Here we have a two piece brass/nickel based, Imperial Prussian Army Belt Buckle. The front depicts the Imperial king’s crown which is then encircled by detailed lines and enclosed by two twisted ropes. The crown is above a laurel leaf pattern and below the Army motto: "GOTT MIT UNS" (God with us). The buckle shows nice age patina ... Read and See More

Here we have a steel based, single piece, green painted Imperial Prussian Army Belt Buckle. The front depicts the Imperial king’s crown which is then encircled by detailed lines and enclosed by two twisted ropes. The crown is above a laurel leaf pattern and below the Army motto: “GOTT MIT UNS” (God with us). The buckle retains beautiful paint ... Read and See More

A tabbed one! It is constructed of a single piece of die struck steel that has been green painted. The obverse roundel depicts a closed winged Heer eagle griping a mobile swastika in its talons on a smooth round background. The eagle is above a half oak leaf and acorn wreath that is tied together at the bottom and is ... Read and See More

Here we have an Imperial Prussian Army Belt Buckle. The buckle is constructed out of a die struck, steel base that has been green painted. The obverse depicts the Imperial king’s crown which is then encircled by detailed lines and enclosed by two twisted ropes. The crown is above a laurel leaf and berry wreath and below the Army ... Read and See More

An honest worn 90cm belt. It is constructed out of a two pieces of blackened/brown leather. One end has been folded over and stitched over an aluminum catch marked with the D&C logo. To the interior of that end it is maker marked and dated. The interior shows a stitched on tongue which has several puncture holes to ... Read and See More

An honest worn 105cm belt. It is constructed out of a two pieces of brown leather. One end has been folded over and stitched over an unmarked steel catch. To the interior of that end it is maker marked and dated. The interior shows a stitched on tongue which has several puncture holes to it, wear and surface cracks. It ... Read and See More

Here we have an alloy based, die struck and officers open claw belt buckle it would be for a 55mm belt. The obverse shows a pebbled square buckle with two prongs with silver wash. This is an unmarked example and could have been used on military coats. ... See More

Rare crack-catch version of a Navy buckle late war dated 1942. It has been deNazified, and you will never find another. ... See More

Nice quality, roughly 42mm wide, 100cm long, bright, silver/aluminum brocade belt with a unique brass buckle, retaining tongue and a silver, alloy, Bavarian officer’s buckle. The belt features 10mm wide, evenly spaced, blue, parallel, horizontal stripes. The buckle end of the belt is folded over to the reverse and stitched down to secure the buckle in place. The ... Read and See More

Constructed out of a heavy die struck, tombac base that has been gold gilded. The obverse depicts a fouled anchor above a lined background which is all encircled by a laurel leaf and berry wreath that is tied together at the bottom. The reverse shows a mirror image of the front. This example is unmarked the one keeper remains. It ... Read and See More

I just love the look of these! It is constructed out of a die struck, aluminum base that has been gold gilded. The obverse depicts a fouled anchor above a lined background which is all encircled by a laurel leaf and berry wreath that is tied together at the bottom. There is a scratch to the front, NOT a crack. ... Read and See More

A rare piece! It is constructed out of a die struck, nickel base that has been silver washed. The obverse depicts a fouled anchor above a lined background which is all encircled by a laurel leaf and berry wreath that is tied together at the bottom. The reverse shows a slightly concave and smooth backing. It is clearly maker marked " ... Read and See More

Here's a quality example with both keepers. Approx. 60MM diameter buckle this is a die struck zinc silvered with polished highlights. There is some wear to the front. It goes nicely with the bullion brocade belt. The dark navy wool to the reverse is in fine condition with minor wear and soil. The hanger clips are correctly hidden under the ... Read and See More

Here's an early quality, die struck, brass based, gold gilded navy undress belt buckle! The obverse depicts an anchor and rope on a lined background which is all encircled by a laurel leaf wreath. The reverse is concave and smooth. It measures approximately 1 1/2 inches wide by 1 1/2 inches high. A great example with honest wear. ... See More

Here's a quality die struck, aluminum based gold guiled navy undress belt buckle! The obverse depicts an anchor and rope on a lined background which is all encircled by a laurel leaf wreath. It measures approximately 1 1/2 inches wide by 1 1/2 inches high. It only has one keeper. Nice gilding! ... See More

An worn belt. It is constructed out of a two pieces of blackened/brown leather. One end has been folded over and stitched over an aluminum catch marked with the OLC logo. The interior shows a stitched on tongue which has several puncture holes to it and wear. The tongue end is shortened a bit and it measures 83cm, so ... Read and See More

Hitler-Jugend Koppelschloß by RZM M4/24 - Friedrich Linden of Lüdenscheid. Introduced in 1936. It is constructed out of a single piece of die struck steel that has been coper flash coated and nickel-silver plated. The obverse roundel depicts a closed winged HJ eagle clutching an HJ diamond within its talons on a pebbled round background. Above the eagle is the ... Read and See More

Hitler-Jugend Koppelschloß by RZM M4/38 (Richard Sieper & Söhne, Lüdenscheid). Introduced in 1936. It is constructed out of an injection molded aluminum-alloy base that has been silver washed. The obverse roundel depicts a closed winged HJ eagle clutching an HJ diamond within its talons on a pebbled round background. Above the eagle is the Hitler Youth motto reading: “Blut und ... Read and See More

Rare buckle by RZM M4/38 (Richard Sieper & Söhne, Lüdenscheid). It is constructed out of an injection molded aluminum-alloy base that has been silver washed. The obverse depicts an open winged eagle clutching an Student diamond within its talons on a smooth background all framed in a oakleaf rectangle. The reverse is maker marked “RZM M4/38. It features an ... Read and See More

Hitler-Jugend Koppelschloß by RZM M4/24 (Friedrich Linden, Lüdenscheid). Introduced in 1936. It is constructed out of a single piece of die struck steel that has been coper flash coated and nickel-silver plated. The obverse roundel depicts a closed winged HJ eagle clutching an HJ diamond within its talons on a pebbled round background. Above the eagle is the Hitler Youth ... Read and See More

Here we have a Deutsches Jungvolk Koppelschloß by RZM UE 72 that was introduced in 1933. It is constructed out of a single piece of die struck brass that has been copper flash coated, nickel-silver plated. The rectangular shaped obverse features a centrally placed bronze Sigrune (The Deutsche Jungvolk emblem) which lies on a smooth silvered backing. The reverse has a soldered ... Read and See More

Here we have an excellent looking HJ Belt Buckle by RZM M4/42! It is constructed out of a die struck steel base that has been silver washed. The obverse roundel depicts a closed winged HJ eagle clutching an HJ diamond within its talons on a pebbled background. Above the eagle is the Hitler Youth motto reading: “Blut und Ehre” (Blood ... Read and See More

Here we have an excellent looking HJ Belt Buckle by RZM M4/110! It is constructed out of a die struck steel base that has been silver washed. The obverse roundel depicts a closed winged HJ eagle clutching an HJ diamond within its talons on a pebbled background. Above the eagle is the Hitler Youth motto reading: “Blut und Ehre” (Blood ... Read and See More

Here we have a 2nd Pattern NSKK EM/NCO Belt and Buckle that was introduced in 1935. (Nationalsozialistisches Kraftfahrkorps Koppelschloß). The buckle is constructed out of a die stamped steel base that has been silver plated. The obverse roundel depicts an open winged NSKK/SA eagle griping a wreathed mobile swastika in its talons on a smooth round backing. The eagle ... Read and See More

Here we have a NSKK (Nationalsozialistisches Kraftfahrkorps) EM/NCO Belt and Buckle. The buckle is constructed out of a two piece die stamped/struck brass base that has been silver plated. The obverse roundel depicts an open winged SA/NSKK eagle griping a wreathed mobile swastika in its talons on a smooth round background. The eagle is above a half ... Read and See More

Here's a honest worn example by Assmann. I have not cleaned or touched it. For you guys who know these well, the type II RZM stamps correctly face the open end of the buckle not the catch as well the prongs are correctly bent down. ... See More

A rare buckle! It is constructed out of a die struck aluminum-alloy base that has silver washed. The round shaped obverse features an SS eagle with its outstretched wings, its tongue sticking out and it is clutching a (centrally placed) wreathed stagnant swastika in its talons. The eagle is above a bannered SS motto which reads "Meine Ehre Heisst Treue." ( ... Read and See More

Here's a honest used example of an unmarked Overhoff & Cie (Ludenscheid) SS EM Belt Buckle! It is constructed out of a die struck, single piece steel base that has been silver/grey painted. The obverse depicts an SS eagle with outstretched wings clutching a centrally placed wreath static swastika in its talons. The eagle is above the SS motto: "Meine ... Read and See More

Here's a honest used example of an unmarked Overhoff & Cie (Ludenscheid) SS EM Belt Buckle! It is constructed out of a die struck, single piece steel base that has been silver/grey painted. The obverse depicts an SS eagle with outstretched wings clutching a centrally placed wreath static swastika in its talons. The eagle is above the SS motto: "Meine ... Read and See More

Here we have a NSDAP Political Leader Belt and Buckle by RZM M4/40 (Giesse & Schmidt, Ruhla), that was instituted in 1940. The buckle is constructed out of a die struck zinc-alloy base that has been gold gilded. Rare as most are alumminum. The round shaped obverse features a centrally placed NSDAP 1939 pattern eagle without-stretched wings clutching a wreathed mobile swastika in ... Read and See More

Worn example of a Political Leaders Belt and early brass open claw buckle. The obverse depicts a rectangle. The buckle is unmarked. A thick brown belt is folded over the buckle and stitched to it. It has 14 adjustment holes and sized "110", (cm). The leather is in worn supple condition. A great addition to your collection! ... See More

Here we have an alloy based, die struck and officers open claw belt buckle it would be for a 45mm belt. The obverse shows a pebbled square buckle with two prongs. This is an unmarked example and could have been used on military or political coats. ... See More

Freiwiliger Arbeitsdienst Koppelschloss Constructed of nickel the obverse with a pebbled finish, depicting a spade with two wheat stalks in a V-formation. Reverse has a standard soldered catch and a double-prong spring bar. Good detail with light wear in nickel. Rare buckle pre-RAD service. Beautifully marked. ... See More

Here's an excellent RAD EM/NCO belt buckle! This buckle is constructed out of a two pieces of die struck/stamped aluminum that have been silver washed. The obverse separately applied roundel depicts a RAD logo, which consists of: a mobile swastika above an upright spade shovel head, this lies on a circular pebbled background which is encircled by a ... Read and See More

Here we have a RAD (Reichsarbeitsdiens) Officers Brocade Belt Buckle by Assmann 1937! It is constructed out of a die struck/stamped, aluminum-alloy base that has been silver washed. The obverse depicts a RAD logo, which consists of: a mobile swastika above an upright spade shovel head, this lies on a circular pebbled background which is encircled by a pebbled ring ... Read and See More

Here’s an early Reichsarbeitsdienst (RAD) EM/NCO Belt Buckle by Richard Sieper & Sohne 1936! Introduced in 1936. It is constructed out of an injection molded aluminum-alloy base that has been silver washed and burnished. The obverse roundel depicts a RAD logo, which consists of: a mobile swastika above an upright spade shovel head, this lies on a circular rough background which ... Read and See More

Buckle suffers some pitting from storage. The reverse is correctly marked matching the tab. ... See More

Berlin Polizei Koppelschloß circa 1950. It is constructed out of a die stamped nickel-silver base that has been silver washed and black enamel painted. The obverse roundel features the Berlin Coat of Arms (rampant lion on top of a shield all underneath a crown) on top of a pebbled background that is surrounded by an encircled star that all lies on ... Read and See More

A rare piece to find! The rectangle buckle is constructed of a single piece of die struck aluminum that has been silver washed with a black painted swastika. The obverse depicts an embossed open winged DLV eagle griping a wreathed black mobile swastika in its talons on a pebbled background that is surrounded by a laurel leaf and berry wreath ... Read and See More

Here we have a 1st pattern RLB EM/NCO Belt Buckle. The first pattern RLB EM/NCO’s buckle was almost identical to the buckle worn by the DLV (Deutscher Luftsport Verband). It is constructed out of a single piece of die struck brass that has been silver washed and black enamel painted. The obverse roundel depicts an open winged ... Read and See More

Here we have the early pre-1938 version. a 1920 version of the German Red Cross Buckle. This piece is constructed in die-struck brass with nickle plating. This has a Red Cross logo in the center being surrounded by a rope and wreath. This buckle has wear yet remains in great condition! This piece can be found in "German Belt Buckles 1845-1945" ... Read and See More

Rare buckle! Aluminum die cast buckle, marked Ges.Gesch. 1; minor contact marks, in slightly worn condition, just enough wear so you know it's real! ... See More

Roughly,55mm wide, 50mm tall, horizontally oval, stamped, two piece, burnished aluminum, belt buckle features a highly embossed oak-leaf wreath encompassing a right facing, political style eagle with out-stretched wings on a slightly domed, pebbled central field. Both eagle and wreath feature nice detailing. Reverse of buckle is flat and has a separate circular plate insert with crimped catch and ... Read and See More

Here we have a Private Forestry Buckle that was introduced in 1938. It is constructed out of a die struck aluminum-alloy base that has been copper flash coated and burnished. The oval shaped obverse features a pebbled center surrounded by an oak leaf and acorn wreath that is tied together at the bottom. The reverse features a crimped on catch and ... Read and See More

Well worn set with pebbled snap. These are blackened and much it worn down. They are unmarked. ... See More

Freiwiliger Arbeitsdienst Koppelschloss Constructed of nickel the obverse with a pebbled finish, depicting a spade with two wheat stalks in a V-formation. Reverse has a standard soldered catch and a double-prong spring bar. Good detail with light wear in nickel. Rare buckle pre-RAD service. Beautifully marked. ... See More

Nice quality, roughly 4cm wide by 98cm long, bright, gold/black brocade belt with a molded, brass buckle. The belt features a 1cm wide central black stripe with two gold bullion evenly spaced stripes. The belt has two sliding, vertical, "keepers", with one positioned on the side of buckle, also in alloy featuring the "bundle of sticks" with a axe ... Read and See More

Really nice set and well marked. ... See More

Rare buckle by RZM M4/38 (Richard Sieper & Söhne, Lüdenscheid). It is constructed out of an injection molded aluminum-alloy base that has been silver washed. The obverse depicts an open winged eagle clutching an Student diamond within its talons on a smooth background all framed in a oakleaf rectangle. The reverse is maker marked “RZM M4/38. It features an ... Read and See More

Plated steel constructed buckle with separately affixed miners insignia with minor wear. These were used through-out the pre-war and post-war era, when this one was made, who knows. I’m calling it post-war. ... See More

Gilt steel constructed buckle with separately affixed miners insignia with minor wear. These were used through-out the pre-war and post-war era, when this one was made, who knows. I’m calling it post-war. ... See More

These were used through-out the pre-war and post-war era, when this one was made, who knows. I’m calling it post-war. Die stamped nickel with brass fittings. The gilt insignia has been bolted on ... See More