Uniforms and Acc.

The dark-teal wool construction with dark green piping. Green buttons are all complete and look to have original stitching too. The brown, (Private Forestry Service) Reviertorester tabs are hand-stitched to a green wool collar with bullion piping. The slip-on shoulder straps attached to this tunic are for the rank of Reviertorester, they too have brown underlay. Three loops are provided ... Read and See More

The dark-teal wool construction with dark green piping. Buttons (Prussian) are all complete and look to have original stitching. The gray, (Heer Forestry Service) Reviertorester tabs are hand-stitched to a green wool collar with bullion piping. The correct sewn-on shoulder straps with single acorn attached to this tunic are for the rank of Reviertorester. The sewn-on shoulder boards are on ... Read and See More

The dark-teal wool construction with dark green piping. Buttons are all complete and look to have original stitching too. The deep green, (State Forestry Service) Reviertorester tabs are hand-stitched to a green velvet collar. The shoulder straps attached to this tunic are for the rank of Oberlandforestmeister. The sewn-on shoulder boards do not match the rank of the tabs. Two ... Read and See More

German WWII Pilots leather flight jacket. Imitation white fur collar. Loops and buttons for shoulder boards but no boards. Main zipper shows damage. Two thread loops on left breast. Fits EK1. Tab for zipper missing. No makers label. This is a men's small size. There is a wear to the right sleeve cuff with a small hole. ... See More

DAF Festanzug tunic, vest, beeches and visor. A Deutsche Arbeitsfront Schirmmütze Herseteller für Mannschaften und Unterführer RZM 16. It is constructed out of dark blue wool, with a decorative black mohair center-band. Attached to the obverse is a DAF cap badge, which consists of a DAF emblem (a cog wheel surrounding a mobile swastika) above a two-piece oak ... Read and See More

Wonderful condition no size or issue markings. Waist is 32" ... See More

Field made out of a Russian zeltbaun. Original wool tunic collar with black waffenfarbe. Eagle sewn on right breast. Thread loops above left breast pocket for ribbon bar. Three sets of thread loops on right breast pocket. Engineer boards for rank of Lt. Right board bas broken tongue. Four button tunic. Three buttons loose but still with original sewing. One ... Read and See More

In “as new condition”. Green Waffenfarbe for Jaeger troops. Jaeger badge on right arm and correct colored signal blitz on left arm. Well size marked in right breast and named to Wchtm. Krenn in left breast. All buttons present and as originally sewn ... See More

Rare Early WW2 German Luftwaffe Winter Flight Suit. Sheep Skin lined and very heavy. Features a button up collar. The front closure opening runs from the neck to the crotch and is secured by large plastic buttons through 2 flaps, left and right, to create a baffle to keep out any chill wind. Made of heavy canvas type material with sheep ... Read and See More

Light weight, ribbed, khaki cotton twill construction Tunic features a vertical, six button front closure with small, opened, fold back, peak lapels and a lay down collar. TIt has four, non-pleated, front pockets with straight edged, button down flaps. Slip on shoulder boards of silver/aluminum braid with mid-blue velvet waffenfarbe. Each shoulder board has a zinc Mercurial staff cypher. ( ... Read and See More

Nice quality, private purchase, elasticized suspenders with natural tan leather and magnetic sheet metal fittings. All complete. ... See More

(NSDAP Manschettenknöpfe). A unique set of NSDAP cufflinks, each constructed of silver plate (Alpacca) with black enamel, the reverse of both with adjustable clips, each unmarked ... See More

Reich Ministry for the Occupied Eastern Territories (RMfdbO) officer’s tunic constructed of a brown wool exterior with a complete rayon interior liner. The collar, dark brown in colour, is neatly lined from end-to-end with twisted silver bullion wire “Waffenfarbe” trim, indicating that this tunic was worn by a officer of the RMfdbO. The upper left arm bears a machine-embroidered, ... Read and See More

Light weight, ribbed, khaki, cotton twill construction shorts feature a vertical, button French fly, with an additional two buttons positioned on the waistband. The waistband has a tunnel looped, tan, canvas belt with a Herring Bone Twill weave, to the right side of the fly with a corresponding, rectangular, open, triple claw, olive drab painted, magnetic sheet metal buckle to ... Read and See More

Breeches are constructed of the nice quality tan wool with a gabardine weave. Breeches feature a button French fly with additional button at waistband. Breeches have two diagonally angled slash front pockets and one right rear horizontal slash pocket. Two fit adjustment straps at reverse side seams, just below waistband with gilt washed magnetic gripper buckles to each. Buttons are ... Read and See More

A 1. Modell - Wehrmacht Schützenschnur 1. Stufe (c.June 1936 – October 1938). Instituted June 29, 1936, the first pattern Wehrmacht Marksmen Lanyard (Wehrmacht eagle in front of a shield) was originally made in four grades to replace the previous sleeve stripes. Come October 17, 1938, the first pattern lanyard was replaced with the second pattern (the insignia differentiated depending on the unit) for grades five through ... Read and See More

A 2. Modell - Wehrmacht Schützenschnur 1. Stufe (c.October 1938 – February 1941). Instituted June 29, 1936, the first pattern Wehrmacht Marksmen Lanyard (Wehrmacht eagle in front of a shield) was originally made in four grades to replace the previous sleeve stripes. Come October 17, 1938, the first pattern lanyard was replaced with the second pattern (the insignia differentiated depending on the unit) for grades five through ... Read and See More

HJ/DJ Führerschnüre. From 1933-1936, this would have indicated service in the Saxony district. Post-1936, this would have indicated the HJ Rank of Gefolgschaftsführer, Obergefolgschaftsführer and Hauptgefolgschaftsführer, or the DJ Rank of Fähnleinführer. It is constructed out of interwoven white and green cotton thread. Two loops, one to either side. It measures 12 3/4 inches ... Read and See More

Minty - NSDAP Trommelschere. It is constructed out of a die cast brass base that has been gold gilded. The shield shaped obverse features a political style eagle above a shield outline with two carrying hooks flanking the eagle’s tail to the bottom, along with a swivel top attachment piece and brown leather hanger. It measures 2 ½ inches wide by 8 ... Read and See More

It is constructed out of twisted interwoven black cotton thread. The whistle loop is worn. It measures 16 inches long. ... See More

NSKK Führerschnur für den Führer eines Sturmes. NSKK Führerschnur für den Führer eines Sturmes ... See More

Deutsches Jungvolk/Hitler-Jugend Trommelschere. It is constructed out of a die cast bronze/coper base that has been gilded. The shield shaped obverse features a Prussian style crowned eagle above two carrying hooks flanking the eagles tail to the bottom and a swivel top nut attachment piece that holds a leather hanger. It measures approximately 2 3/4 inches wide by 7 inches tall. ... See More

Deutsches Jungvolk/Hitler-Jugend Trommelschere. It is constructed out of a die cast bronze/coper base that has been gilded. The shield shaped obverse features a political style eagle above a shield outline with two carrying hooks flanking the eagles 'tail' to the bottom and a swivel top attachment piece and black leather hanger. It measures approximately 2 ½ inches wide by 7 inches ... Read and See More

Deutsches Jungvolk/Hitler-Jugend Trommelschere. It is constructed out of a die cast bronze/coper base that has been gilded. The shield shaped obverse features a Prussian style crowned eagle above two carrying hooks flanking the eagles tail to the bottom and a swivel top attachment piece that holds a leather hanger. It measures approximately 2 3/4 inches wide by 7 1/2 inches tall. ... See More

Deutsches Jungvolk/Hitler-Jugend Trommelschere. It is constructed out of a die cast bronze/coper base that has been gilded. The shield shaped obverse features a political style eagle above a shield outline with two carrying hooks flanking the eagles tail to the bottom and a swivel top attachment piece. It measures approximately 2 ½ inches wide by 5 inches tall. Nicely patinaed. ... See More

A 30cm long, twisted green rayon cord with an extended button attachment loop to either end. The lanyard is in damage free with no frays. ... See More

9 29mm gold buttons, 1 20mm gold button and 1 silver 20mm button. All are RZM marked. ... See More

3 buttons 2 are RZM marked they measure 20mm in diameter. ... See More

(NSDAP Manschettenknöpfe). A unique set of NSDAP cufflinks, each constructed of silver plate (Alpacca) with black enamel, the reverse of both with adjustable clips, each unmarked ... See More

As shown along w a political button. to show size. You do NOT get the button. ... See More

Field gray painted uniform buttons. ... See More

. ... See More

Here’s 6 beautiful matching NSDAP Political Uniform buttons by Berg & Nolte RZM 5/117/8 constructed out of two pieces of die struck steel that has been gold gilded/silver plated. Correct for tunics and the political leaders tunic shirt. The round shaped obverse’s depicts an early political style eagle with outstretched wings clutching a stagnant swastika in its talons, in front ... Read and See More

Here we have two NSDAP Political Uniform Buttons! They are constructed out of two pieces of die struck steel that have been gold gilded/silver plated. The round shaped obverse depicts an early political style eagle with outstretched wings clutching a stagnant swastika in its talons, in front of a pebbled backing. The left buttons reverse is maker marked "RZM ... Read and See More

Here we have a NSDAP belt ramp! It is a multi-piece construction, made of die stamped gold washed aluminum alloy and plated steel. The round shaped obverse is pebbled. The reverse is marked. There is also a crimped on aluminum round wire loop. It measures 7/8 of an inch in diameter. Nice! ... See More

NSDAP belt ramp by Overhoff & Cie of Lüdenscheid. They are a multi-piece construction, made of die stamped gold washed aluminum alloy and plated steel. The round shaped obverse is pebbled. The reverse is marked "Overhoff". There is also crimped on aluminum round wire loops. They measure 7/8 of an inch in diameter. Nice! I have eight here, they are being ... Read and See More

A neat uniform button here! It is constructed out of three pieces two are die stamped steel that has been plated/silver washed the other is the tombak loop. The obverse features the Wesel coat of arms surrounded by “Bürger Schützenverein Wesel”. A great piece to add to your collection! ... See More

Deutsches Jungvolk/Hitler-Jugend Trommelschere. It is constructed out of an injection molded iron base that has blackened. The obverse features a small Prussian style crowned eagle above two carrying hooks flanking the eagle’s tail to the bottom and a swivel top nut attachment piece that holds a stitched on blackend leather hanger. It is numbered 649 and 5. The eagle measure 3 3/4 ... Read and See More

Deutsches Jungvolk/Hitler-Jugend Trommelschere. It is constructed out of an injection molded brass base that has gilded. The obverse features a small Prussian style eagle above two carrying hooks flanking the eagles tail to the bottom and a swivel top nut attachment piece that holds a dual riveted on blackend leather hanger. The eagle measure 2 3/8 inches wide by 2 3/4 inches tall. ... Read and See More

Fully lined. Calf skin uppers and leather foot part. All straps and buckles present. Both zippers work well. Metal and leather tabs present on both boots Metal zipper tabs marked “ZIP” and a lightning bolt. Marked “A. BETZBAMBERG Marz 1943" in one boot. ... See More

Early high top SA brown leather boots. Two straps at top on right boot missing. No lace in the left. Both boots number 59781 on exterior instep of boot sale so they are a pair. Some hobnails missing on the soles. I see no size markings approx Men's 8. ... See More

Smooth, multi-panel, mid-brown and blackened leather construction ankle boots. insides of the boots are marked, (see last pic). Hobnails all look complete. I don't know if the laces are original. Roughly a size 7. Shows the expected age and use, but overall nice condition ... See More