Insignia and Patches

Printed SS-Obersturmbannfuhrer camo rank patch. Has some glue remnants on reverse likely from this being stuck in a scrapbook at some point. ... See More

Waffen-SS arm-chevron intended for a 'Rottenführer', this is the tropical version. The chevron is executed in black wool having the yellow-coloured, sub-dued, NCO braid with two black lines. These were also used on the camouflaged 'Dot' pattern 4-pocket tunics. Nice original example in mint and unissued condition! ... See More

The insignia consists of a single golden yellow cellleon "V" shaped, chevron, machine stitched to an inverted triangular, deep navy blue wool base. ... See More

The insignia consists of a single, machine woven, silver/aluminum, diamond patterned, tress chevron mounted on an inverted triangular, black wool base. ... See More

Here we have a Navy Corproral Rank Chevron (Kriegsmarine Hauptgefreiter Armwinkel). Worn on the left upper sleeve. The base color of the insignia was to match the color of the uniform it was worn on. It is constructed out of three blue rayon thread on a downward pointing white cotton base. It measures approximately 4 inches wide by 2 1/2 inches tall. Nice! ... See More

An Obergruppenfuhrer badge of yellow machine embroidered oakleaves above three yellow lace bars on black wool backing; a Brigadefuhrer badge of yellow machine embroidered oakleaves above single yellow lace bar on black wool backing; a Sturmann's single yellow chevron on black wool backing; and a Rottenfuhrer badge of two yellow chevrons on black wool backing. In unused condition, the officers' ... Read and See More

Here we have a navy able seaman clerical chevron. The obverse shows a yellow chevron below two crossed feathers all on a blue wool and back cotton backing. It measures 4 inches wide by 5 inches high. Minor mothing, it areas to have been folded over. ... See More

Rare original printed insignia worn by Flanders volunteers. Rare original printed insignia in unissued condition! ... See More

42mm x 42mm rhomboid black wool base over a buckram backing. Affixed to the front is the typical DAF fourteen tooth cog wheel encompassing a canted swastika. Reverse is complete with its original paper RZM tag. Near mint. ... See More

This patch has been machine embroidered using flatwire, white and black threads to a green rayon backing. The obverse depicts a centrally placed Heer closed winged eagle clutching a swastika within its talons, beside two Standarte flags and above an oak leaf design all on a shield and square green rayon backing. Unissued just showing storage wear, Nice! ... See More

Here we have a Hitler Youth / BDM clothing diamond! It is constructed out of a rayon base with white, red and black machine embroidered cotton stitching. The rhomboid diamond shaped obverse depicts a Hitler Youth logo which consists of; a black mobile swastika above a white square diamond which is surrounded by alternating white and red quadrants and is all ... Read and See More

Tagged - Bund Deutscher Mädel Jungmädelgruppe “Ost Generalgovernement” Obergauarmdreieck by RZM A4/302. Introduced April 1934, the BDM/JM sleeve triangles would have been worn on the upper left sleeve while the member was completing their service in the specified region. The Eastern General Government was comprised of what is today southeastern Poland and part of the northwestern Ukraine, and ... Read and See More

1935 pattern, machine woven, black sigrune on a 50mm diameter golden yellow circular field mounted on a square tan rayon backing. Coloration of the insignia signifies Oberbann 2. Unused and undamaged. Of Note: In April 1936 the Oberbann system was discontinued and with it the assorted colored Sigrune sleeve badges were also discontinued. ... See More

1935 pattern, machine woven, white sigrune on a 50mm diameter dark blue circular field mounted on a square tan rayon backing. Coloration of the insignia signifies Oberbann 4. Unused and undamaged. ... See More

1935 pattern, machine woven, white sigrune on a 50mm diameter green circular field mounted on a square tan rayon backing. Coloration of the insignia signifies Oberbann 3. Unused and undamaged. Of Note: In April 1936 the Oberbann system was discontinued and with it the assorted colored Sigrune sleeve badges were also discontinued. ... See More

Woven black rayon construction isosceles triangle features machine woven Gothic script in two lines, in golden yellow threads. The triangle also has a narrow machine woven golden yellow border stripe near the outside edges. The triangle has wear and frays. ... See More

Hitler Youth BDM District Sleeve Triangle – West Mittelrhein. Appears tunic-removed and is stained. ... See More

This patch has been machine embroidered using flatwire, white and black threads to a green rayon backing. The obverse depicts a centrally placed Heer closed winged eagle clutching a swastika within its talons, beside two Yellow Standarte flags and above an oak leaf design all on a shield and square green rayon backing. Nice! ... See More

This patch has been machine embroidered using flatwire, white and black threads to a green rayon backing. The obverse depicts a centrally placed Heer closed winged eagle clutching a swastika within its talons, beside two Black Standarte flags and above an oak leaf design all on a shield and square green rayon backing. Nice! ... See More

Machine woven, vertically oval, insignia features a woven, dark green wool base with three, mid-green, oak-leaves and a single acorn with light green "veins" and a small, mid-brown, stem, all encompassed by a light green, simulated, twisted rope border. ... See More

Deutsches Rotes Kreuz “Meiningen 3” Hoheitsabzeichen Armdreieck. January 1938 uniform regulations introduced the assignment location sleeve triangle for wear on the upper right sleeve of the service tunic and greatcoats of salaried DRK personnel. It is constructed out of a machine embroidered grey and white stitched thread to a grey rayon base. The triangular shaped obverse features a DRK eagle above “Meiningen 3”, ... Read and See More

Here we have a SS Signals EM/NCO Sleeve Diamond! It is constructed out of black wool and white rayon stitching on a glued backing. The obverse depicts a downward pointing blitz arrow on a black diamond shaped field. The reverse shows the glued backing. It is in wonderful condition and part of a Veteran bring back group. Note we ... Read and See More

Second pattern. It is constructed out of machine embroidered yellow rayon thread on a green wool oval backing. The obverse features a centrally placed vertical flaming artillery shell surrounded by an oak leaf and acorn wreath that is open to the top. It has faded a bit red. It measures roughly 2 5/8 inches tall by 2 inches wide. It is in unissued ... Read and See More

Large, roughly 150mm tall, 125mm" wide (not including the factory backing), machine woven, shield shaped, RAD insignia consists of a narrow black outer border stripe with a white inner border stripe encompassing a red base with a central white circular field featuring a black spade head flanked by two diagonally angled sheaths of wheat. The insignia shows minor age. Reverse ... Read and See More

A Heer Sportabzeichen. The sports shirt eagle was introduced on July 4th 1935 and was to be worn on the front center chest of the white sleeveless sports shirt. It is constructed out of a machine embroidered black and white cotton thread to a white rayon base. The rectangular obverse depicts a black Army eagle with outstretched wings clutching a wreathed ... Read and See More

Large, roughly 150mm tall, 125mm" wide (not including the factory backing), machine woven, shield shaped, RAD insignia consists of a narrow black outer border stripe with a white inner border stripe encompassing a red base with a central white circular field featuring a black spade head flanked by two diagonally angled sheaths of wheat. The insignia shows minor age. Nice. ... Read and See More

Introduced in June 1943, the insignia takes the form of a machine woven cogwheel, in pink thread, on a roughly 50mm diameter field-grey wool base. The badge is bordered in sliver/aluminum twisted cord piping. Un-issued, undamaged. ... See More

Printed SS-Obersturmbannfuhrer camo rank patch. Has some glue remnants on reverse likely from this being stuck in a scrapbook at some point. ... See More

Navy Ordnance Artificer Career Patch. Multi-piece stamped zinc and blue wool. 2 5/8 x 3 1/2. ... See More

The insignia consists of a roughly, 60mm diameter, navy blue wool base with a machine embroidered horizontal torpedo superimposed over a multi-cogged wheel with four internal spokes, all in bright golden yellow cotton threads. ... See More

The insignia consists of a roughly, 60mm tall, 55mm wide, vertically oval, navy blue wool base with a hand embroidered five pointed tip, star to the center and four, fine, hand embroidered outer edge stripes, all in gold wire threads. Purchased from Vet's family by me. ... See More

The badge consists of a roughly, 55mm diameter Luftwaffe blue/grey wool base with a machine embroidered, seven spoked wheel rim and tire with an upward swept wing emanating from the central hub all in silvery/grey threads. The embroidery shows nice detailing including treads to the tire. There is a moth nip. ... See More

Here we have a Ordnance Personnel's Trade Patch. It is constructed out of machine embroidered silver rayon thread, on a blue /grey base. The obverse depicts a gothic style "F", indicating that the individuals trade is that of a Ordnance Artificer. It measures 2 1/8 inches in diameter. Cool! ... See More

Here we have a Navy Electric Technician Grade II Specialty Trade Badge (Sonderausbildung Abzeichen für Elektrotechnik Lehrgänge II). This would be worn on the upper left sleeve of the uniform. The base color of the insignia was to match the color of the uniform it was worn on. It is constructed out of a navy blue wool base ... Read and See More

Here we have a Navy Heavy Artillery Gun Chief's Specialty Trade Badge (Sonderausbildung Abzeichen für Geschützführer-für Schwere Artillerie der Schiffe). This would be worn on the upper left sleeve of the uniform. The base color of the insignia was to match the color of the uniform it was worn on. The oval badge is constructed out ... Read and See More

Here we have a Navy Administrative Career Sleeve Insignia (Verwaltungsmaat Laufbahnabzeichen). This would be worn on the upper left sleeve of the uniform. The base color of the insignia was to match the color of the uniform it was worn on. It is constructed out of a navy blue wool base with yellow machine embroidered rayon thread and has a ... Read and See More

The badge consists of a roughly, 2" diameter, Luftwaffe blue/grey wool construction base with a machine embroidered, downward pointing, blitz arrow in silvery/grey rayon threads to the center. The badge is in overall excellent, unissued condition with minimal age toning and remnants of some glue to reverse.. ... See More

Here’s a fine piece! The circular patch is constructed out of a dark navy blue wool base with two machine embroidered silver-grey cotton “V” shaped chevrons. The chevron is in overall good, clean condition with traces of glue and material from where this badge was removed from the Vet's scrapbook. ... See More

The badge consists of a roughly, 55mm diameter Luftwaffe blue/grey wool base with a machine embroidered, seven spoked wheel rim and tire with an upward swept wing emanating from the central hub all in silvery/grey threads. The embroidery shows nice detailing including treads to the tire. The badge is in overall good, clean condition with traces of glue ... Read and See More

Here we have a Navy Machine Engine EM Career Sleeve Insignia! It depicts a blue machine embroidered cog wheel on a white cotton backing with a re-enforced edge. Soil. It measures roughly 2 1/2 inches wide. ... See More

Here we have a Navy Machine Engine EM Career Sleeve Insignia (Machninen Engine Laufbahnabzeichen)! The base color of the insignia was to match the color of the uniform it was worn on. It depicts a yellow machine embroidered cog wheel on a blue wool backing. It measures roughly 2 1/2 inches wide. ... See More

Here we have a Navy Clerical EM Career Sleeve Insignia (Schreiber Laufbahnabzeichen)! The base color of the insignia was to match the color of the uniform it was worn on. It depicts two blue machine embroidered crossed feathers on a white cotton backing with a stitched on exterior border. IIt measures approximately 2 1/4 inches wide by 2 1/4 inches tall. A nice one! ... See More

Here we have a Navy Aircraft Warning EM Career Sleeve Insignia (Kriegsmarine Flugmeldedienst Laufbahnabzeichen)! The base color of the insignia was to match the color of the uniform it was worn on. It depicts, in blue machine embroidered rayon; a centrally placed stylized "wings" above two crossed blitz arrows on a white cotton backing with a stitched on exterior border. ... Read and See More

Here we have a Kreigsmarine Gunner-Observer of Automatic Anti-Aircraft Weapons Speciality Trade Badge (Flak-schüze/Flak Beobachter). This would be worn on the upper left sleeve of the uniform. The base color of the insignia was to match the color of the uniform it was worn on. The oval badge is constructed out of a navy blue wool base with ... Read and See More

It is constructed out of machine embroidered yellow rayon thread stitched to an oval blue wool base that has a glued on black cloth backing. The odd thread catch. It measures approximately 2 13/16 inches wide by 3 5/8 inches tall. Nice ... See More

Here we have a Kreigsmarine Electric Technician Speciality Trade Badge Sonderausbildung Abzeichen für Elektrotechnik Lehrgänge). This would be worn on the upper left sleeve of the uniform. The base color of the insignia was to match the color of the uniform it was worn on. The oval badge is constructed out of a navy blue wool base with ... Read and See More

An Obergruppenfuhrer badge of yellow machine embroidered oakleaves above three yellow lace bars on black wool backing; a Brigadefuhrer badge of yellow machine embroidered oakleaves above single yellow lace bar on black wool backing; a Sturmann's single yellow chevron on black wool backing; and a Rottenfuhrer badge of two yellow chevrons on black wool backing. In unused condition, the officers' ... Read and See More

Here we have a Navy Flak Artillery Personal Trade Patch. It is constructed out of yellow machine embroidered rayon thread to a navy blue wool base. The oval shaped obverse features a centrally placed yellow anti-aircraft gun, with wings to either side of it and an oak leaf and acorn cluster with a mobile swastika to the bottom, above a ... Read and See More

Here we have a Kriegsmarine Artillery Personal Trade Patch. It is constructed out of yellow machine embroidered rayon thread to a navy blue wool base. The oval shaped obverse features a centrally placed yellow anti-aircraft gun, with wings to either side of it and an oak leaf and acorn cluster with a mobile swastika to the bottom, above a navy ... Read and See More

Here we have a Luftwaffe Motor Vehicle Drivers Trade Badge (Kraftfahrpersonal Tätigkeitsabzeichen). It is constructed out of a blue-grey wool base with white machine embroidered cotton. The round shaped obverse features a 2nd pattern Luftwaffe open winged eagle, clutching a mobile swastika in one of its talons, on top of a vehicle radiator grill, stitched to the blue grey ... Read and See More

Here we have a Heer 2nd Pattern Oberschätze’s Rank Pip! It is constructed out of a field-green wool and white machine embroidered cotton thread. It features a centrally placed pip in white thread on a round field-green wool. It measures 2 1/8 inches in diameter. Beautiful condition! ... See More

Here we have a machine embroidered crossed rifles, in silver/grey rayon threads on a round blue/grey wool base. ... See More

Here we have a 2nd Patter Oberschätze’s Rank Pip! It is constructed out of a forest-green wool, buckram backing and machine embroidered cotton threads. It features a centrally placed pip in white thread on a round forest -green wool. The reverse shows a glued/stitched on buckram backing. It measures 2 1/8 inches in diameter. Minor thinning to the wool. ... Read and See More

Here’s a fine piece! The circular patch is constructed out of a dark navy blue wool base with two machine embroidered silver-grey cotton “V” shaped chevrons. There is one mothing hole in it. Cool! ... See More

Piped in bullion for outstanding achievement this Trade badge is in great shape with no mothing! ... See More

Here we have a Navy Senior Clerical NCO Career Sleeve Insignia! It depicts a yellow machine embroidered anchor behind two crossed feathers and above a chevron on a blue and white cotton backing. It measures roughly 2 1/2 inches wide by 3 1/2 inches tall. Good condition! ... See More

Here we have a machine embroidered pip in white rayon thread on a round light green/brown machine embroidered base, with an outer edge. The back has a white backing. Vet purchased: Find out more on the Vet! ... See More

Here we have a Navy Engine NCO'S Career Sleeve Insignia! It depicts a yellow machine embroidered anchor behind a cog wheel, on a blue and white cotton backing. It measures roughly 2 1/2 inches wide by 3 1/2 inches tall. Lightly faded, good condition! ... See More

Here we have a Navy Coastal Artillery EM Career Sleeve Insignia! It depicts a blue machine embroidered winged artillery shell with "flames", on a white cotton backing. It measures roughly 2 1/2 inches wide. Good condition! ... See More

Here we have a Navy Machine Engine EM Career Sleeve Insignia! It depicts a blue machine embroidered multi-cogged wheel on a white cotton backing. It measures roughly 2 1/2 inches wide. Fine condition! ... See More

Here we have a Navy Clerical EM Career Sleeve Insignia! It depicts two yellow machine embroidered crossed feathers on a blue wool backing that is again attached to a black cotton backing. The back is marked ?.45?. It measures roughly 2 1/2 inches wide. Beautiful condition! ... See More

Worn on the upper left sleeve of the uniforms, this career sleeve patch depicts a machine woven boat anchor with a torpedo with wings above a chevron all on a blue wool backing. The reverse has a protective black fabric and has a little marking that reads ?-65?. It measures approximately 3.5 inches high by 2.75 inches wide. It's in great condition! ... See More

Here's a Luftwaffe Flying Personnel Trade Badge! This badge illustrates a machine embroidered propeller above two wings, on a blue wool backing. It measures 4 inches long by 1 3/4 inches tall. Beautiful! ... See More

Here we have a navy able seaman clerical chevron. The obverse shows a yellow chevron below two crossed feathers all on a blue wool and back cotton backing. It measures 4 inches wide by 5 inches high. Minor mothing, it areas to have been folded over. ... See More

Here we have a Boatswain’s EM Career Sleeve Patch! The obverse depicts a yellow machine embroidered star on a blue wool and light blue cotton backing. It measure 2 1/4 inches wide. Age mothing, Nice detail! Overall a great piece here just for you! ... See More

Here we have a machine embroidered chevron in white rayon thread on a round black/navy blue wool base, with a cotton backing. ... See More

Here we have two machine embroidered crossed rifles in silver/grey rayon threads on a round blue/grey wool base. ... See More

Here we have a machine embroidered gothic style, "F" for Feuerwerker, in silver/grey rayon threads on a round blue/grey wool base. ... See More

Here we have a machine embroidered pip in white rayon thread on a round tan machine embroidered base, with an outer edge. The back is marked ?H & W?. ... See More

Here we have a machine embroidered pip in white rayon thread on a round green wool base. ... See More

These measures approx. 7" round and are machine stitched in both cotton thread on a rayon/cotton backing. Condition is as shown. ... See More

Rare original printed insignia worn by Flanders volunteers. Rare original printed insignia in unissued condition! ... See More

Machine woven, second pattern sleeve insignia features a mid-blue shield with scalloped tipped top and fine black outer border. The center of the shield features three horses heads joined to a central circular base in bright yellow threads. The top edge of the shield has a black horizontal bar with bright yellow script, "Bergkaukasien", (Caucasus Mountains). The shield is still ... Read and See More

Anti Aircraft Gunner/ Electrical Technician. Machine embroidered on Navy wool. ... See More

Here we have a Salzburg (Austria) Coat of Arms Arm Patch. The obverse depicts a machine embroidered Salzburg Coat of Arms on a black wool base. It measures roughly, 2 3/5 inches in diameter. There are no mothing holes and it retains nice color. A good Vet purchased patch! Find out more on ... Read and See More