Recently Added Items

Two-sided - NSDAP Banner by Otto Muller of Bad Godesberg (Rheinland). Multi-piece died cotton that has been stitched together. The hoist end with attachment string has torn off. I am sure you could stitch it back together. The original rare paper tag remains stapled on and intact. It measures 76 inches long by 31 inches wide. Nice color. ... See More

Eisernes Kreuz 1. Klasse by L/11 - Wilhelm Deumer of Lüdenscheid. The 1st Class Iron Cross was awarded to those who had received the 2nd Class Iron Cross and preformed 3-5 acts of bravery in the face of the enemy, or actions that were clearly above and beyond the call of duty. It is a multi-piece, die struck construction that ... Read and See More

МОПР - Membership Badge International Organization of Assistance to the Fighters of the Revolution. OSOAVIAKhIM - Osoaviakhim Voroshilov Marksmans Badge. Russian Soviet Star Hammer & Sickle. ... See More

Model 1938 - Deutsches Rotes Kreuz Hauer für Mannschaften und Unterführer. The bright blade on this one looks beautiful! The crossgrain is easily visible and the sharp teeth to the saw back are in perfect condition! It is stamped “Ges. Geschützt.” To the obverse under the crossguard. The fit is perfect. The blade rates Exc++/NM. It shows ... Read and See More

Unissued - Wehrmacht Heer (WH) Dolch Portepee für Offiziere. It is constructed out of a wood and white cotton string base that is wrapped in braided, flat and rolled silver-aluminum thread. It is approximately 42cm in length. Comes with its issue paper tag. Mint. ... See More

A 2. Klasse Silber Spanien-Kreuz mit Schwertern by CEJ - C. E. Juncker of Berlin. The Silver Spanish Cross with Swords was awarded to those who had at least moderate combat experience, having participated in decisive battles. It is a multi-piece construction made out of a die struck nickel-silver base and was finished in a protective lacquer coating. The obverse depicts ... Read and See More

A Model 1938 Deutsche Volkspflege Führer Dolch. The bright blade on this one looks good. It retains a nice and bright mirror like finish. It retains a perfect tip and the fit is nice and tight. The blade rates an Exc+. It has all its' crossgrain and a few dots of age. The original black leather buffer pad remains intact. ... Read and See More

An anti aircraft defense is self defense tinnie. It is constructed out of a die stamped tombak base that has been bronze washed. The obverse depicts a man on one knee, shooting an arrow at planes in the sky, with the reading "Luftschutz tut not" (Air Protection is necessary) on either side of him. The background is pebbled with black ... Read and See More

A nice looking Army 18 Years Long Service Award! It is constructed out of a die struck zinc-alloy base that has been silver washed. The obverse features a pattée style cross with a centrally placed closed winged Heer Eagle griping a mobile swastika in its talons / "18" (reverse), encircled above a pebbled background. To the top is an integral loop and ... Read and See More

Post-War Reproduction - Dienstauszeichnung der NSDAP 3. Stufe in Gold by L/58 - Rudolf Souval of Vienna. Rudolf Souval made awards during the war and afterwards. In my opinion this is a nice placeholder for someone not looking to spend thousands for an original. ... See More

1st Model – Deutsches Reich Bahnschutz Dolch für Führer. The unmarked plated blade on this one looks great. It has a nice mirror like finish to it. The fit is nice and tight and the tip comes to a sharp point. The blade rates Exc+/Exc++. It has an ever so slight dull towards the tip. It shows age ... Read and See More

Wehrmacht Luftwaffen (WL) Dolch Portepee für Offiziere. The ball, stem and slide are all original. The 22cm string is post-war. Correct for either a 1st or 2nd Model Luftwaffe Dagger. ... See More

Shows wear age and small tears. ... See More

Here's a nice set! The die struck buckles and bands are made out of zinc base that has been silver washed and depict oak leaves and acorns throughout. The clips and back piece are made of a zinc-alloy base that have been silver washed. The well working clips have a nice decorative pebbled design to them. The top fitting is ... Read and See More

This is a late 1883 patterned WWII Imperial Japanese Naval officer dirk. This example is of wartime construction with machine made 8.25" blade as measured from the crossguard. The blade shows some age but is fairly clean. The crossguard is polished brass. The grip is double twist brass wire wrapped over imitation, (plastic)ray skin. All grip wire and fittings to include ... Read and See More

Made of brass with inlaid ebony. I believe the skull and crossbones refers to "Christ over death". Ok so here's what I know about this, it was a Vet bring-back and these crosses were absolutely used by Chaplin's, they were also common through out Europe at the time. Period wear to the high areas. The cross is 129mm tall. Really, ... Read and See More

Ok this is one for the advanced collector. Here's an rare early Transitional SMF all in early nickel silver! Most guys know little about these but they do make an excellent study. They are rare being only produced for a few short months before production switched to the pure 1st model luft. Wittmann speaks to this dagger specifically in chapter 3 ... Read and See More

Abzeichen 1. Mai 1936 by FR. Keck & Sohn of Pforzheim. Introduced in 1933, the NSDAP declared May 1st the “Day of National Work” as an official state holiday to celebrate laborers and the working classes. It is constructed out of a die struck aluminum-alloy base that has been silver washed. The round shaped obverse depicts an old style plow, riveting hammer and downward ... Read and See More

Here we have a 1968 Hubert H. Humphrey “HHH” Campaign Pin! It is die struck and gold gilded. A nice piece! ... See More

Model 1939 - Postschutz Dolch für Führer by Paul Weyersberg & Co. of Solingen. The whole piece is in its original state, with the exception of the blade that has been heavily cleaned and re-crossgrained. The acid etched oval “Paul Weyersberg & Co. Solingen” wreathed broad sword manufacturers marking remains visible. The tip comes to a perfect point. The blade rates ... Read and See More

Nationalsozialistisches Kraftfahrkorps Fahrzeug Dienst Wimpel. It is constructed out of multiple pieces of stitched cotton and blackened leather. The triangular shaped obverse features a machine embroidered brown NSKK eagle, with out-stretched wings clutching a wreathed swastika within its talons, below a bannered “NSKK” and above a white and black bordered roundel. The eagle insignia lies on a triangular red cotton ... Read and See More

Model 1933 Hitlerjugend Fahrtenmesser by RZM M7/13 - Arthur Schüttelhofer & Co. of Solingen. I purchased the dagger from the veteran’s family, it came with no scabbard and wooden grip plates. The grip plates were done in the period. I guess it could have been done by the veteran’s family afterwards, but IMO it was done in the period. ... Read and See More

Prinzen – Abzeichen für Marine-Flugzeugführer auf Landflugzeugen im Etui 1915 by C. E. Juncker of Berlin. Instituted February 23rd 1915 by the King of Prussia and the Emperor of the German Empire Wilhelm II to pilots of the Navy, who completed their service in the war on land planes. Approximately 230 badges were awarded making it one of the rarest badges of ... Read and See More

Here we have a beautiful set of deluxe Army hangers! The die struck buckles, back piece, clips and bands are made out of an alloy base that has been silver washed. They all depict oak leaves and acorns throughout. The two clips are "D.R.G.M." stamped. The stitching, flatwire and reverse felt are in excellent condition! The top ... Read and See More

A Helft Uns Helfen Tinnie. It is constructed out of an injection molded white bakelite base that has been red painted. The obverse depicts a centrally placed medical cross, with the reading "Helft uns Helfen!" (Help Us!) to the top and bottom. The reverse has a glued on steel round plate, with a well working vertical pin assembly. It measures 3/4 ... Read and See More

Came in with a group of german and american items. Looks like Klaas? If you know what it is I am sure you've found a bargain. ... See More

Beautiful craftsmanship! It is constructed out of a gold bullion, orange, white and blue rayon along with red and black wool which covers a white cardboard base and a white cotton backing. The triangular shaped obverse features a centrally placed Dutch Republic Lion (crowned rampant lion holding a sword and arrows, with its tongue sticking out), above an orange, white ... Read and See More

A Model 1937 - Reichsfinanzverwaltung Dolch für Landzoll-Beamte by Alexander Coppel of Solingen. This piece has been professionally cleaned and the scabbard has been re-leathered. The cleaned and re-crossgrained blade on this one is nice and bright. The acid etched “Alcoso ACS Solingen” maker mark is beautifully executed. The tip comes to a sharp point and the fit is nice ... Read and See More

Issue case with minor wear correctly stamped RZM M1/34 Karl Wurster this is for a 15 marked ring. ... See More

Here we have a deluxe Army Horseshoe Hangers! The die struck buckles, horseshoe back piece, clips and bands are made out of an alloy base that has been silver washed. They all depict oak leaves and acorns throughout. The two clips and back connector are all "D.R.G.M." stamped. The stitching, flatwire and reverse felt are in good ... Read and See More

POST-WAR French made for the Mauser SVW p38 pistols as they continued to manufacture during their 1945 - 1946 occupation. ... See More

1941 dated belt that's been repaired as shown. Measures 35 1/2 inches long. ... See More

Here's a nice example with all matching patina. The blade on this one has some scuffs worse towards the tip, some crossgrain remains. The crisp acid etched WKC knights head maker mark is beautifully executed! The fit is nice and tight. The blade rates an Exc+. The original leather buffer pad remains intact. The early nickle plated scabbard is more ... Read and See More

A Grenzmark WHW Tinnie. It is constructed out of machine embroidered multicolored rayon with a glued on black paper backing surrounded by a die stamped steel base that has been green painted. The shield shape obverse depicts Grenzmarks coat of arms, with "Grenzmark" directly above it, and "WHW" to the very top. The fullback reverse shows a paper backing, with ... Read and See More

Here we have a Luftwaffe EM/NCO Visor Wreath and Cockade! It is aluminum based, die stamped and silver washed with black and red paint work. The obverse depicts a centrally placed black, white and red cockade that is surrounded by an oak leaf and acorn wreath, with wings to the sides. The reverse shows a hollow back. No prongs ... Read and See More

Modell der Olympia Glocke designed by Walter E. Lemcke and manufactured by Koenigliche (Staatliche) Porzellan Manufaktur (KPM – Royal (State) Porcelain Factory) of Berlin. Available as a commemorative piece for the 1936 Olympic Games. It is constructed out of a two-piece (bell and clapper) molded white porcelain base with an adjoining S hook, seated on a black painted wooden stand and housed, ... Read and See More

A Super Deluxe set of Model 1935 Army Dagger Hangers (Heer Dolchgehänge). The back connector, buckles, bands and clips are constructed out of an injection molded zinc-alloy base that has been silver washed. They all depict beautiful detail with oak leaves and acorns throughout. The grommets and prongs are intact. All of the components are held together with two straps ... Read and See More

Original wartime in printed oil-cloth. ... See More

A great piece by Eickhorn! The blade on this one has some age spotting toward the tip and has been cleaned. There's crossgrain left. It has a beautifully executed, dark stamped Over-the-shoulder "Original Eickhorn Solingen" maker mark that is hard to see as it's under the crossguard. I've seen these highly placed last Eickhorn marks placed there often, trust me ... Read and See More

Here we have a Trier Castle Tinnie! This circular tinnie is made of a die stamped piece of tombak that has been silver washed and pronged onto a piece of white celluloid. The obverse depicts a Castle above "Trier", on a white field. The reverse shows the prongs that hold the front insignia on and has a well working, horizontal ... Read and See More

A VDA Cornflower Pin. It is constructed out of a die stamped sheet metal base that has been pearl and blue painted. The obverse depicts a cornflower. The hollow back reverse has a top flap that holds a well working steel pin. Nice color remains. 1 3/8 tall by 1 1/16 wide. Cool! ... See More

Preußen Flieger-Erinnerungsabzeichen im Etui by an unknown maker. Instituted January 27th 1914 by Kaiser and King Wilhelm II. It was awarded to officers, non-commissioned officers and soldiers who, in case of mobilization, were no longer considered and no longer intended for use. The badge was intended as a replacement for the military pilot badge and the badge for observation officers. ... Read and See More

Horseshoe Super Deluxe set of Model 1935 Army Dagger Hangers (Heer Dolchgehänge). These are quite unique in that the bottom clips have are intended for Deluxe RAD Leader Handers. The patina is all the same and the stitching has not been touched so I’m confident its been this way since the period. The horseshoe back connector, buckles, bands and ... Read and See More

Here we have a Niederwalddenkmal stickpin. It is constructed out of a die stamped steel base that has been silver washed. The shield shape obverse has a picture of the Niederwalddenkmal monument, which is surrounded by a gold pebbled border. The Niederwalddenkmal monument was built in 1870's/80's to commemorate the unification of Germany. The full back reverse has a ... Read and See More

Here we have an early multi piece construction HJ armband. The obverse features a separately applied and centrally placed HJ logo, which consists of a rayon white diamond and a black rayon multi-piece mobile swastika, which is in front of a stitched white horizontal line and all lies on a red cotton backing. The top and bottom have re-enforced red ... Read and See More

Here we have a generic Model 1935 Army Dagger (Reichsheer Offiziersdolch)! The unmarked bright blade on this one is nice with some minor age spotting and scuffs but still good crossgrain. The tip comes to a perfect point and the fit is perfect. The blade rates an easy Exc+.The brown leather buffer pad remains intact. The dent-free steel based, nickel-silver ... Read and See More

Riquewihr Tinnie. It is constructed out of die stamped tombak, that has been silver washed and black burnished. The obverse depicts the city of Riquewihr, and to the bottom reads: “Riquewihr”. There are two small holes on the left and right side, which string can be put through. It measures 1 7/8 inches wide by 1 1/4 inches tall. Nice! ... See More

A 3. Klasse Spanien-Kreuz in Bronze (ohne Schwerter) by L/15 - Otto Schickle of Pforzheim. The Bronze Spanish Cross without Swords was awarded non-combatants for three months of service in Spain. It is a multi-piece construction made out of a die struck bronze base that has been bronze washed, burnished and finished in a protective lacquer coating. The obverse depicts a ... Read and See More

A Model 1933 Hitlerjugend Fahrtenmesser by RZM M7/1/40 - Gebrüder Christians, Christianswerk, Solingen. The blade on this one looks great! The stamped and blackened “RZM M7/1/40” maker mark is dark, crisp and beautifully executed! Nice crossgrain remains visible. It has a solid fit and a perfect tip. The blade rates an easy Exc++/NM. It shows surface scratches to the ... Read and See More

A Personalized - Model 1938 Deutschen Rotes Kreuz (DRK) Führer Dolch. The bright blade on this one looks excellent. Nice crossgraining and plated ricasso. It retains a nice and tight fit. The blade rates an Exc++. It shows some age grey and spotting throughout. The original black leather buffer pad remains intact. The steel based, nickel-silver plated scabbard looks excellent ... Read and See More

This is well worn but complete and serviceable. Pls note the weelop on the hanger is partly torn, see pics. ... See More

A nice Verkehrs-Aufsicht Armband (Traffic Control)! Made of orange cotton linen material with black printed letters. For Military para-military formations including the NSKK. The top and bottom are turned over and stitched. Some fading to obverse and minor soil. The back has been stitched together to size ... See More

This German tinnie was for the remembrance of Frederick der Große (Fredrick the Great). Here’s a picture of it in wear. It is constructed out of a die struck steel base, that has been blackened/silver washed.The obverse depicts the face head of Fredrick the Great, with the writing "1786 1936" to the left of his head. The reverse ... Read and See More

A Deutschen Volksgemeinschaft Westmark (D.V.G) Reichsgau Westmark Nationalsozialistische Parteiabzeichen by Werner Redo of Saarlautern. During German occupation of the Reichsgau Westmark (Saarland/Rheinpfalz and CdZ-Area Lothringen), inhabitants could obtain German citizenship by becoming members of the Deutschen Volksgemeinschaft (D.V.G). It is constructed out of a die struck nickel-silver base that has been silver washed and contains ... Read and See More

A Deluxe M1937 Luftwaffen Dolchgehänge. The back connector, buckles, bands and clips are all constructed out of an injection molded zinc alloy base that has been burnished. They all depict beautiful oak leaves and acorns throughout. The grommets and the prongs are steel based and lightly oxidized. All of these components are held together with two straps. They are ... Read and See More

Really nice early degan here. These were authorized for wear personally by Himmler and ownership required a certificate. Each one was, upon being awarded, duly noted in the SS Diensltersliste and became a part of the owner's service record along with his other awards and citations. This example is marked with the earliest Krebs maker mark. The 34" blade rates a ... Read and See More

The well-known militaria author Sascha Weber examines the Cuff Titles of the Wehrmacht in this book. For the first time, all of the manufacturer's variants, as well as unofficial types of the Cuff Titles "KRETA", "AFRIKA", "METZ 1944", and "KURLAND" are presented in detail on 200 pages in words and pictures - supplemented by numerous photos and award documents. The reader is ... Read and See More

In addition to the variants, the historical background, the genesis and the award conditions, the author also goes into the exact work and production processes. This work is rounded off with partly unknown information and pictures of individual medal makers who produced this medal. This work is supplemented by numerous rare award documents and photos. A must-have reference for these ... Read and See More

A nice example of a 2nd Model Luftwaffe Dagger! The bright blade on this one looks good. The acid etched "F. W. Holler Solingen" maker mark is dark, crisp and beautifully executed! Nice crossgrain remains. It has a perfect tip and perfect fit. The blade on this one rates Exc+. It shows age gray and has been cleaned. The leather ... Read and See More

Nice quality.

Please if you know what this is attributed to let me know. ... See More

Verwundetenabzeichen in Schwarz 1939 mit Besitzzeugnis - Awarded to Obgefr. Mollwitz. The Black Wound Badge was awarded to those who were wounded once or twice by hostile action (including air raids), or frostbitten in the line of duty. It is constructed out of a die stamped steel base that has been black painted and lacquered. The oval shaped obverse depicts an ... Read and See More

A third reich period NS-Hago Ostmark Labour Badge. It is constructed out of a die stamped tombak base that has been bronze washed.The triangular obverse depicts a swastika to the top, with a crossed pickaxe and shovel superimposed over top of it, and the reading "Arbeitsschlacht Gau Bayr, Ostmark" to the bottom. The hollow back reverse has a well ... Read and See More

A Silber Panzerkampfabzeichen by Adolf Scholze, Grünwald a. N.! The panzer assault badge was awarded to those who had either; taken part in three armored assaults in three different days, had been wounded in the course of an assault or who had earned a bravery decoration in the course of an assault. The silver class was presented to tank ... Read and See More

If you're in the market for a 1st Luft, look no further! An excellent example here! The plated blade on this one looks great and retains a beautiful bright finish! The dark and crisp "Original Eickhorn Solingen" squirrel maker mark is beautifully executed. It has a tight fit and the tip is perfect. The blade rates a NM. It has ... Read and See More

A very early, rare and desirable piece! It is constructed out of a die stamped bronze base that has been bronze washed and burnished. The shield shaped obverse features a centrally placed downward pointing broad sword, with “Mai” and “1930 to the crossguard, and is beside a mobile swastika with sun rays coming out of it (left) and “Bayreuth” (right). All ... Read and See More

Spanien-Kreuz in Silber mit Schwertern by Otto Schickle of Pforzheim. The Silver Spanish Cross with Swords was awarded to those who had at least moderate combat experience, having participated in decisive battles. It is a multi-piece construction made out of a die struck tombak base that has been silver washed with frosted highlights and finished in a protective lacquer coating. ... Read and See More

Here we have a genuine amber stickpin. It was made by the Natur Bernsetein Manufaktur (NJB) Company in Königsberg Ost-Preussen. There is a tombak stick pin going through it. There is corrosion. Really cool! ... See More

Red DAF book, in good condition with lots of stamps. ... See More

Worn example still quite serviceable with plating loss. ... See More

Not sure what this one is, if you know pls do tell me. The wee thread and needle on it can be discarded w no damage. It was on it and I think it was maybe some sort of price tag? not sure just discard it if you wish.

Please if you know what this is attributed to let ... Read and See More

Here we have 6 Des Führers Kampf and 1 Der Führer und Mussolini Propaganda Booklets. There are 2 sets of duplicate booklets. Each booklet has a small hole to the top right of the reverse with a string going through it. They measure 1 1/2 inches wide by 2 1/16 inches tall. Nice! ... See More

Prinzen – Abzeichen für Marine-Flugzeugführer auf Landflugzeugen 1915 by Paul Meybauer of Berlin. Instituted February 23rd 1915 by the King of Prussia and the Emperor of the German Empire Wilhelm II to pilots of the Navy, who completed their service in the war on land planes. Approximately 230 badges were awarded making it one of the rarest badges of the Airforce. It ... Read and See More

This would be appropriate for an SA dagger hanger. It is constructed out of a brown leather bade that has been stitched around a pebbled nickel D-loop. It is “RZM L2/5” marked. A nice one! ... See More

Rare patch here in flat-wire and rayon. This was purchased from Vet's family by me. ... See More

Well can't say I've owned one of these before! Here we have a RARE, quality bullion hand embroidered NSKK Officer Cap Eagle. It is on a orange/red wool and blue cotton base that is covered to the back with blue paper. The obverse depicts a bullion NSKK open winged eagle, clutching a wreathed swastika in its talons below a ... Read and See More

Blue/brown tassels were used by company grade officers (lieutenants and captains), red/brown by field grade officers (majors and colonels), red/gold tassels for general grade officers. ... See More

Type I - Bayerisches Flugzeugführerabzeichen im Etui by Carl Poellath of Schrobenhausen. The Pilot badge was awarded to those officers, NCO’s and men who have taken the prescribed pilot’s examinations and have completed their instruction with the Flying Corps at a military airbase and have received a certificate of competence as a pilot as decreed by the ... Read and See More

Here have a Stuttgart pin. It is constructed out of a die struck zinc-alloy base that has been silver gilded. The obverse depicts a centrally placed horse on a shield (Stuttgarts flag), and a ship to the top that has a swastika on one of the sails. The obverse reads "Stuttgart Stadt der Auslandeutschen" (Stuttgart City of Foreign Germans). The ... Read and See More

Technische Nothilfe (TeNo) Hänger für den Hauer der Mannschaften und Unterführer by F. W. Assmann & Sohn of Lüdenscheid. It is a multi-piece constructed, made out of brown leather that has been stitched and riveted together with an aluminum alloy clip and prong. Very nice leather. It measures 7 3/8 inches long by 2 1/8 inches wide. The majority of these ... Read and See More

A great looking one here! The more desirable plated blade on this one is clean with just a bit of age. It has a beautifully executed "SMF Solingen" maker mark, with a less than perfectly stamped proof mark just above it! The blade on this one rates a Exc+. The buffer pad remains intact. The correct SMF steel based airplane ... Read and See More

As shown. I'm thinking French or Dutch?

Please if you know what this is attributed to let me know. ... See More

M1935 Railway Dagger Hangers (Deutsche Reichsbahn Dolchgehänge). The back connector, buckles, bands and clips are all constructed out of an injection molded nickel-silver base that has been silver washed. The buckles and bands depict beautiful oak leaves and acorns throughout. The grommets and prongs are nickel-silver based and plated. All of these components are held together with two straps. ... Read and See More

A S-Hertogenbosch (City in the Netherlands) Bronze Medallion. It is constructed out of a die struck bronze base that has been bronze washed and finished in a lacquer coating. The obverse depicts the city's coat of arms, with "S-Hertogenbosch" inscribed below in a scroll. The full back reverse depicts a small floral design. It measures 1 5/8 inches in diameter. Cool! ... See More

Here have a Stuttgart Stickpin. It is constructed out of a die struck tombak base that has been gold gilded and contains black enamel paint work. The obverse depicts a centrally placed horse on a shield (Stuttgarts flag), and a ship to the top that has a swastika on one of the sails. The obverse reads "Stuttgart Stadt der Auslandeutschen" ( ... Read and See More

Here we have a Heer Sports Shirt Insignia! It is constructed out of a machine embroidered black and white cotton on a white rayon base. The rectangular obverse depicts a black Heer eagle with outstretched wings clutching a wreathed swastika within its talons on a half-moon white cotton base and a white rectangular rayon base. It shows age toning, soilage ... Read and See More

M1935 Army Dagger Hangers (Heer Dolchgehänge). The back connector, buckles, bands and clips are all constructed out of an injection molded alloy base that has been silver washed. The buckles and bands depict beautiful oak leaves and acorns throughout. The grommets are steel based and plated. The prongs are aluminum. All of these components are held together with two ... Read and See More

A Model 1933 Hitlerjugend Fahrtenmesser by RZM M7/51 1937 - Anton Wingen Jr. of Solingen. The ricassoed blade on this one looks good! The etched “RZM M7/51 1937” maker mark and “Blut und Ehre!” motto are nicely executed! It has a solid fit and a sharp tip. The blade rates an easy Exc+. It shows age grey, the cutting edge and tip have ... Read and See More

Issue Case for a Spanish Cross in Silver with or without Swords. It is constructed out of a wood and pressed cardboard base that is covered in a simulated grained blue leather. To the front is a multi-piece plated steel, rectangular spring loaded closure button. To the back is a steel, staggered, piano hinge that is covered in the simulated ... Read and See More

A 1933 Trier Tinnie. It is constructed out of a die stamped nickel-silver base that has been silver washed. The obverse depicts a Church, and has the reading "1908 1933 Silb. Jubelfest Des M.G.V. ST. Paulin Trier Verbunden Mit Bundessingen 8.9.u.10. Juli 1933". The hollow back reverse has horizontally soldered on, well working, tombak pin assembly. It measures 1 5/16 inches wide by 1 7/8 inches ... Read and See More

Unmarked well worn black belt loop appropriate for an SS dagger or NSKK. ... See More

The bullion threads are damaged at the end. ... See More

Controversial so I'm selling as REproduction BeVo machine stitched in cotton of a rayon backing. marked 26 to reverse and issue stamped. Shows wear. ... See More