Headgear Accessories

A SchutzStaffel Schirmmütze Adler by F. W. Assmann & Sohne of Lüdenscheid. It is constructed out of an injection molded aluminum-alloy/cupal base that has been silver washed and lacquered. The obverse features a left facing SS eagle with outstretched wings clutching a wreathed mobile swastika in its talons. The hollow back reverse is maker marked: “RZM M1/17” (F. ... Read and See More

Nice quality, hand embroidered national eagle in bright, silver/aluminum wire and bullion threads with navy blue accent threads on a cut-out, deep, navy blue wool base. Removed from a cap. 1935 pattern, hand embroidered oak-leave wreath in bright silver/aluminum bullion and wire threads on a cut-out, navy blue wool base with an internal padding. The wreath encompasses a hand ... Read and See More

Schirmmütze Adler. Gilt washed, alloy construction, national eagle features out-stretched wings and is clutching a wreathed, canted, swastika in it’s talons. Original pin. ... See More

Mützen Abzeichen. Machine woven national eagle in matte grey threads positioned above a national tri-color cockade with a black outer circle encompassing a white inner circle and a red center dot, on a woven, black rayon trapezoidal base. Unissued and cut from a roll. You get one with your order. ... See More

Here we have a 1939 Pattern NSDAP Political Visor Cap Eagle by RZM M1/100 (Werner Redo, Saarlautern). It is constructed out of a die stamped zinc base that has been silver washed. The obverse depicts a political eagle with out stretched wings, clutching a wreathed swastika within its talons. The hollow back reverse is maker marked “RZM M1/100 and three crimped ... Read and See More

An early second pattern Heer Mützen Adler. It is constructed out of die stamped aluminum that has been silver washed. The obverse depicts a Heer eagle, clutching a wreathed swastika within its talons. All tombac prongs remain intact. The silver wash looks great. It measures 2 5/8 inches wide by 1 1/8 inches tall. A great piece! ... See More

1st Pattern - Polizei Mützenadler c.April 1934-June 1936. It is constructed out of a two-piece die stamped nickel-silver base that has been silver washed with polished highlights. The obverse depicts a police eagle clutching a swastika in its talons on top of an oval laurel leaf and berry wreath that is tied together at the bottom. The hollow back ... Read and See More

A NS-RKB Veterans Mützenadler. It is constructed out of an injection molded aluminum-alloy base that has been silver washed and contains black enamel work. The obverse depicts a Veterans eagle, clutching a wreathed swastika within its talons, with two crossed broad swords and a centrally placed Iron cross on its chest. The hollow back reverse shows three tombac prongs. ... Read and See More

Here we have a 1936 Political Leaders Visor Cap Eagle 1939 Pattern by RZM M1/8. It is constructed out of a die stamped aluminum base that has been silver washed. The obverse depicts a political eagle with out stretched wings, clutching a wreathed mobile swastika in its talons. The hollow back reverse is maker marked "RZM M1/8" (Ferdinand Wagner, Pforzheim). It also ... Read and See More

Rare insignia here. Measures approx 70mm widein white thread on wool. Shows mothing. ... See More

An early second pattern Heer Mützen Adler. It is constructed out of die stamped nickel-silver based that has been silver washed. The obverse depicts a Heer eagle, clutching a wreathed swastika within its talons. All tombac prongs remain intact. The silver wash looks great. It measures 2 5/8 inches wide by 1 1/8 inches tall. A great piece! ... See More

A Rural “Landwacht” (Land Watch/Guards) Auxiliary Police Visor Cap Eagle (Gendarmerie Polizei “Landwacht” Mützenadler). It is constructed of a die stamped, alloy base that has been silver washed. The obverse depicts a police eagle, clutching a wreathed swastika within its talons, surrounded by an oak leaf wreath and is above a bannered: “Landwacht”. The hollow back reverse has ... Read and See More

The insignia consists of a machine woven black rayon base featuring a machine woven, second pattern, (Circa June 1936-May 1945), right facing, police cap eagle with out-stretched wings, clutching a wreathed, canted swastika in it’s talons, encompassed by a vertically oval, oak-leaf wreath all in silver/white rayon thread. The edges have been folded over and secured to the reverse ... Read and See More

A Rural “Landwacht” (Land Watch/Guards) Auxiliary Police Visor Cap Eagle. It is constructed of a die stamped, alloy base that has been silver washed. The obverse depicts a police eagle, clutching a wreathed swastika within its talons, surrounded by an oak leaf wreath and is above a bannered: “Landwacht”. The hollow back reverse has a soldered on steel round ... Read and See More

A stamped alloy, silver-washed eagle, whose spread wings have a span of 2.5", with a wreathed, mobile swastika in its talons, and a Iron Cross to its breast (with black painted center), behind which are crossed swords. A horizontal pin-back device, with a hinge and catch, is to its hollow-backed reverse. Fairly hard eagle to find. ... See More

Here we have a 1939 Pattern NSDAP Political Visor Cap Eagle by RZM M1/16 (Dr. Franke & Co. KG, Ludenscheid). It is constructed out of a die stamped tombac base that has been silver washed. The obverse depicts a political eagle with out stretched wings, clutching a wreathed swastika within its talons. The hollow back reverse is maker marked “RZM M1/16 and ... Read and See More

Here we have Postal Protection Police Visor Cap Eagle! It is die stamped zinc base. Most of the silver wash has been absorbed. The obverse depicts an NSDAP eagle, clutching a wreathed swastika within its talons. Both tombak prongs remain intact. It is unmarked measuring 1 55mm wide. A nice quality piece! ... See More

Kreigsmarine Mützenadler und Eichenlaubkranz mit Korkade für Schirmmütze. They are constructed out of a machine embroidered yellow, black, white and red rayon threat to a navy-blue wool base, with a glued on black buckram backing. The wreath is padded. ... See More

Large 4" wide bird in brass with both prongs intact. ... See More

Here we have a yellow and dark green machine embroidered M43 Overseas Cap Eagle. The obverse depicts a golden yellow kriegsmarine eagle with out-stretched wings, clutching a wreathed swastika in its talons on a dark blue rayon backing. the eagle itself measures approximately 62mm wide. Unissued ... See More

Constructed of aluminum, with a black painted swas. in the shape of a second pattern RLB (Reichsluftschutzbund) eagle clutching a mobile swastika on a sun emitting rays; the reverse with both prongs in place. Measures 68 mm (w) x 34 mm (h); in overall virtually mint condition with the exception of some scratches to the swas. ... See More

An second pattern Heer Mützen Adler. It is constructed out of die stamped zinc based that has been silver washed, (50% of the wash is absorbed). The obverse depicts a Heer eagle, clutching a wreathed swastika within its talons. One prong remains intact. It measures 65mm wide. with all three prongs remaining. ... See More

The insignia consists of a machine woven black rayon base featuring a machine woven, second pattern, (Circa June 1936-May 1945), right facing, police cap eagle with out-stretched wings, clutching a wreathed, canted swastika in it’s talons, encompassed by a vertically oval, oak-leaf wreath all in silver/white rayon threads. ... See More

Rayon on tan base. ... See More

Here we have Postal Protection Police Visor Cap Eagle! It is die stamped aluminum base. The obverse depicts an NSDAP eagle, clutching a wreathed swastika within its talons. Both tombak prongs remain intact. It is marked RZM M1/17, (E. W. Assmann & Sohne) measuring 1 55mm wide. A nice quality piece! ... See More

Pins all missing. ... See More

A Wasserzollbeamte Schirmmütze Abzeichen. The eagle and wreath are constructed out of a die stamped zinc-alloy base that have been gold washed. The tri-piece cockade is constructed out of a die stamped aluminum alloy base that has been black painted/silver washed and has a red felt plug. The obverse features a sea customs eagle with outstretched wings clutching ... Read and See More

A beautiful example! On a blue wool and black cloth backing is a white machine embroidered Luftwaffe open winged eagle, clutching a swastika in one of its talons. Overall good, clean condition with traces of glue and material from where this badge was removed from the Vet's scrapbook. ... See More

A good Kriegsmarine (Navy) M43 Overseas Cap Eagle (Mützen Adler)! It is constructed out of machine embroidered yellow and blue cotton thread to a navy-blue rayon backing. The obverse features a yellow Kriegsmarine eagle with out-streached wings clutching a wreathed mobile swastika in its talons on a blue backing. The reverse has three pieces of black paper/glue remnants ... Read and See More

A good cap eagle! It is constructed out of machine embroidered yellow and blue cotton thread to a navy-blue rayon backing. The obverse features a yellow Kriegsmarine eagle with out-streached wings clutching a wreathed mobile swastika in its talons on a blue backing. The reverse has three pieces of black paper/glue remnants and a piece of tape. It measures 2 1/2 ... Read and See More

On green rayon backing, we have here a grey machined embroidered police open winged eagle, clutching a wreathed swastika in its talons, above another wreath and below a cockade. It is a near mint unissued piece here for the taking! ... See More

Here we have an Army M44 Eagle/Cockade Cap Insignia. On a field grey cotton backing, is a grey machined embroidered Heer open winged eagle, clutching a wreathed swastika in its talons, above a tri color cockade all on a green trapezoid backing with a thin white cotton border to the exterior. It measures 2 5/8 inches wide by 2 inches high. It ... Read and See More

A great example of a Herman Goring Division Cap Badge! It is the second pattern eagle in silver/grey rayon on a black wool backing. It measures approximately 3 inches wide by 1 1/2 inches high. Nice! ... See More

Beautiful example of a Herman Goring Division Cap Eagle! It is the second pattern, machine embroidered, eagle in white/grey rayon on a black wool backing. This one appears to be unissued. It measures approximately 3 inches wide by 1 1/2 inches high. It retains beautiful color and detail! Just wonderful! ... See More

Here we have several 2nd Pattern Police Cap Eagles! They are aluminum based and die stamped. The obverse depicts a police eagle, clutching a wreathed swastika within its talons, surrounded by an oak leaf wreath. The reverse continues to retain both of its tombak prongs. Nice and bright with beautiful detail and in excellent condition! ... See More

On a green/grey backing, we have here a grey machined embroidered Heer open winged eagle, clutching a wreathed swastika in its talons, above a cockade. It measures 2 1/2 inches wide by 1 1/2 inches high. It is a beautiful piece! ... See More

Nice quality, hand embroidered national eagle in bright, silver/aluminum wire and bullion threads with navy blue accent threads on a cut-out, deep, navy blue wool base. Removed from a cap. 1935 pattern, hand embroidered oak-leave wreath in bright silver/aluminum bullion and wire threads on a cut-out, navy blue wool base with an internal padding. The wreath encompasses a hand ... Read and See More

A Wehmacht Heer Eichenlaubkranz mit kokarde für die Schirmmütze. It is constructed out of a multi piece injection molded aluminum alloy base that has been silver washed along with being black painted and contains a red felt plug. The obverse features a cockade surrounded by an oak leaf and acorn wreath that is open to the top and ... Read and See More

A Wehmacht Heer Eichenlaubkranz mit kokarde für die Schirmmütze. It is constructed out of a multi piece injection molded aluminum alloy base that has been silver washed along with being black painted and contains a red felt plug. The obverse features a cockade surrounded by an oak leaf and acorn wreath that is open to the top and ... Read and See More

Here we have an uissued Bahnschutzpolizei EM/NCO Visor Cap Badge Wreath. It is constructed out of a die stamped aluminum alloy base that has been silver washed. The obverse features a winged wheel above an oak leaf and acorn cluster wreath. The hollow back reverse has all prongs. It measures approximately 2 ¾ inches wide by 1 ¾ inches tall. Nice silver wash ... Read and See More

A Wehmacht Heer kokarde für die Schirmmütze. Constructed out of a multi piece injection molded zinc alloy base that has been silver washed along with being black painted and contains a red felt plug. This shows wear and age. Both prongs remain. ... See More

A 2 piece Wehmacht Heer Eichenlaubkranz mit kokarde für die Schirmmütze. It is constructed out of a multi piece injection molded aluminum alloy base that has been silver washed along with being black painted and contains a red felt plug. The obverse features a cockade surrounded by an oak leaf and acorn wreath that is open to the top ... Read and See More

A Wehmacht Heer Eichenlaubkranz mit kokarde für die Schirmmütze. It is constructed out of a multi piece injection molded aluminum alloy base that has been silver washed along with being black painted and contains a red felt plug. The obverse features a cockade surrounded by an oak leaf and acorn wreath that is open to the top and ... Read and See More

Die struck zinc insignia with cockade, both tombac pins intact. ... See More

Here we have a minty set of TENO Visor insignia to include the eagle wreath & cockade and chin strap. All of this is mounted on some sort of civil visor. The visor itself I suspect is post-war. So this could be used as a reinactors Visor or just remove the insignia and toss the cap. Inside the sweatband was a ... Read and See More

Here we have a two piece Army Visor Wreath and Cockade Insignia. It is constructed out of a multi-piece die stamped/injection molded, aluminum base that has been gold washed, black painted and contains a red felt plug. The obverse features a centrally placed national tri-color (red, white and black) cockade surrounded by a half oak leaf and acorn wreath ... Read and See More

A Wasserzollbeamte Schirmmütze Abzeichen. The eagle and wreath are constructed out of a die stamped zinc-alloy base that have been gold washed. The tri-piece cockade is constructed out of a die stamped aluminum alloy base that has been black painted/silver washed and has a red felt plug. The obverse features a sea customs eagle with outstretched wings clutching ... Read and See More

Visor Cap Wreath by B&N 1939. Die stamped, silver washed aluminum alloy. All four prongs remain intact! It measures approximately 2 9/16 inches wide by 1 3/4 inches tall. A great replacement part. ... See More

Here we have an Army M44 Eagle/Cockade Cap Insignia. On a field grey cotton backing, is a grey machined embroidered Heer open winged eagle, clutching a wreathed swastika in its talons, above a tri color cockade all on a green trapezoid backing with a thin white cotton border to the exterior. It measures 2 5/8 inches wide by 2 inches high. It ... Read and See More

Here we have a Luftwaffe EM/NCO Visor Wreath and Cockade! It is aluminum based, die stamped and silver washed with black and red paint work. The obverse depicts a centrally placed black, white and red cockade that is surrounded by an oak leaf and acorn wreath, with wings to the sides. The reverse shows a hollow back. Both prongs ... Read and See More

Here we have an Early Visor Cap Cockade! This a multi-piece cockade. The round shaped obverse depicts an off-red cotton centerpiece, surrounded by a silvered tombak based swirled piece and above a black painted zig-zagged backing. All of the tombak prongs remain intact. It measures approximately 7/8 of an inch in diameter. A nice bright example looking for the right visor! ... See More

This is a die stamped, aluminum, decorative wreath for a cockade. It depicts oak leaves and acorns. The back retains all 2 tombak prongs. ... See More

This is a die stamped, aluminum, decorative wreath for a cockade. It depicts oak leaves and acorns. The back retains all 4 aluminum prongs. ... See More

Here we have a machine embroidered red, white and black cotton cockade on a black rayon backing. It is in unissued condition! Extremely hard to find! ... See More

On a green/grey backing, we have here a grey machined embroidered Heer open winged eagle, clutching a wreathed swastika in its talons, above a cockade. It measures 2 1/2 inches wide by 1 1/2 inches high. It is a beautiful piece! ... See More

This is a die struck aluminum decorative wreath for a cockade. It depicts oak leaves and acorns. The bottom prong remains intact. The obverse looks great! ... See More

Die struck insignia with cockade, pin broke off reverse. ... See More

Here we have a Luftwaffe EM/NCO Visor Wreath and Cockade! It is constructed out of a die stamped aluminium base that has been silver washed and black and red painted. The obverse shows a centrally placed tri-color cockade surrounded by an oak leaf and acorn wreath that has two wings coming out of it. The reverse shows a hollow ... Read and See More

One piece silver washed die struck alloy with a painted cockade. Measures approx 5 1/2" and nicely vaulted insignia is in NM condition. We have several with all mounting prongs intact. ... See More

Unissued machine embroidered national eagle with outstretched wings, clutching a wreathed, canted, swastika in it’s talons in silver/grey rayon threads, positioned above a national tri-color cockade with a black outer circle encompassing a white inner circle and a red center dot, on a loosely woven, brownish/field-grey rayon trapezoidal base. The outer edge of the trapezoidal base has ... Read and See More

Jager Troops Cap Badge sew on badge with 3 prongs and a 2 piece Mountain Trooper's Cap Edelweiss without pins. ... See More

Unissued die-struck alloy, three piece construction visor cap insignia. Winged wheel with nation cockade. Insignia measures approximately 150mm x 43mm.Complete with all original attachment prongs. Hard to find. ... See More

Kreigsmarine Mützenadler und Eichenlaubkranz mit Korkade für Schirmmütze. They are constructed out of a machine embroidered yellow, black, white and red rayon threat to a navy-blue wool base, with a glued on black buckram backing. The wreath is padded. ... See More

Approx 36mm with in gilt tomabac. ... See More

A woven rayon red-white-black HJ cap diamond with some storage age. You will get 1 cut off the roll. Roughly 27mm x 15mm. ... See More

German Veteran's organization 2piece badge well marked with both prongs. ... See More

Here's an enameled one! Made of die struck, tombac and multi-colored enamel, this full-back RAD Cap Badge features the RAD logo: a swastika above a spade shovel and two outward pointing wheat pieces. The reverse 4 prongs remain. The enamel remains in great shape! Just minor period wear and hairline cracking. A nice piece to add to a RAD or Cap ... Read and See More

Reichsarbeitsdienst Mützen Abzeichen 1938. It is constructed out of a die struck aluminum-alloy base that has been silver washed and contains black and red paint work. The obverse features the RAD emblem, which consists of: a black mobile swastika in front of a spade shovel head (that is outlined in red) and is above two outward pointing wheat sheaths. The ... Read and See More

Pins all missing. ... See More

Machine embroidered insignia, whose cut-out wool base features an embroidered upward pointing silver spade head, bordered in red, with a black mobile swastika to its center, and silver sheaves of wheat extending upwards from the handle. Near mint and nice! ... See More

This hammer is set against an attached toothed gear wheel marked with the initials of this union organization, "NSBO". The reverse is fitted with a small pin. Shows wear with both pins intact ... See More

In its original cellophane and paper envelope sold by “Thiele & Steinert Aktiengesellschaft Berlin SW 19 Alexandrinenstraße 89 Fernruf: A 7 3026-27”. House of History found a horde of these a while back. ... See More

On green rayon backing, we have here a grey machined embroidered police open winged eagle, clutching a wreathed swastika in its talons, above another wreath and below a cockade. It is a near mint unissued piece here for the taking! ... See More

For the members of the Schutzmannschaften (local auxiliary security forces in the occupied east). It is machine made of silver flatwire and black threads on a black rayon base. The obverse depicts a flatwire vertically elongated mobile swastika within in a laurel leaf wreath that is tied together at the bottom and all lies on a black base. It measures ... Read and See More

A full length, 1936 to 1945 pattern, woven, black rayon construction cap talley features machine woven, Gothic script, "Kriegsmarine", in bright golden yellow cellon threads. The ends of the talley are cut at a diagonal angle which would create the "swallow-tail", affect when applied to the cap. ... See More

Kaiserliche Marine S.M.S. Bremen Mützenband. The SMS Bremen (Bremen-class cruisers) was launched on July 9, 1903, and sunk in a Russian minefield on December 15, 1915 It is constructed out of a black satin/rayon base with gold-colored machine stitched thread. The obverse reads, in gold: “S.M.S. Bremen” on a black base. The top and bottom have chain-like re-enforce ... Read and See More

Kaiserliche Marine S.M.S. Elbing Mützenband. The SMS Elbing (light cruiser) was ordered by the Imperial Russian navy under the name Admiral Nevelskoy from the Schichau-Werke shipyard in Danzig in 1913. Following the outbreak of World War I, the ship was confiscated in August 1914 and launched on November 21, 1914 as the SMS Elbing. It is constructed out of a black ... Read and See More

H.M.S. Goldcrest. H.M.S. Royal Arthur. F.M.B. Devonport. H.M.S. Ganges. ... See More

Kriegsmarine Mützenband. It is constructed out of a black silk/satin base with machine stitched yellow cotton thread. The obverse reads, in yellow colored gothic type script: “3. Schiffsstammabteilung der Nordsee 3.” on a black base. It has two cut off edges. It measures 45 inches long by 1 ¼ inches wide. A great display piece for any navy collection! ... See More

Later Cellon based example. ... See More

Customs Officers Visor Cap Chin Cord. It is a multi-piece construction made out of twisted silver flatwire covered cotton string, green rayon strong and two aluminum slides that are also covered in the same material. It measures 12 ½ inches long. Beautiful condition! ... See More

Here we have a German Customs Visor Chinstrap! It is made of grey and green, interwoven and twisted flatwire/bullion/cloth. It is in superb condition. Measures just under 1 foot. ... See More

... See More