United States Militaria

US Vet obtained group for a US Army Air Corps Staff Sargent. Distinguished Flying Cross, Air medal. there was a photo with this group but I do not know if it's the guy. ... See More

The Distinguished Flying Cross was awarded for “Heroism or extraordinary achievement while participating in an aerial flight”. It is constructed out of a die struck bronze base that has been chemically blackened and finished in a clear lacquer protectant. The obverse features a four-bladed propeller on top of a pattée style cross that has rays coning out of its ... Read and See More

A US Army Marksman Badge with a Sharpshooter Clasp. It is constructed out of a die struck blackened sterling silver alloy. It depicts a Maltese style cross with a black pebbled surface and an outlying silvered border. Below the cross are two loops attached to a “Sharpshooter” clasp. The fullback reverse shows a well working pin hinge and catch assembly. ... Read and See More

The United States Navy Good Conduct Medal was authorized on November 21, 1884. The medal is awarded to enlisted personnel of the United States Navy and Naval Reserve (active duty) for creditable, above average professional performance, military behavior, leadership, military appearance and adaptability based on good conduct and faithful service for three-year periods of continuous active service. It is constructed out of ... Read and See More

Nice Lapel pin with functioning "spin off" device. ... See More

Nicely marked pin 2 piece construction marked 10K GF<(Gold Filled) and "Serling" by AMICO ... See More

For 37mm and Machine gun ... See More

Zuhrah A.A.O. N.M.S. Minneapolis Minn cased medal with imitation tortoise case. ... See More

As shown, some Canadian, US and Russian items all post-1945 ... See More

An American Army Medal of Honor by H.L.P. N.Y. Co - Type VI; Gold-Filled and enamels, un-named, marked "The congress to 1-10 10K HLP-GF" (Gold-Filled) to the reverse, 38.5 mm x 56.5 mm inclusive of its eagle and VALOR suspension, on a period original full-length neck ribbon with horizontal octagonal thirteen star cravat pad, (a bit soiled) sewn in ... Read and See More

US M1944 tunic also known as the "Ike" Jacket with 2 caps and small group of insignia/awards. The Jacket is from a US 9th air force vet. ... See More

An Efficiency Honor Fidelity Medal. It is constructed out of a die struck tombak base that has been bronze washed. The round obverse depicts an eagle sitting upon a sword that lays on top of a book, all encircled by the words " Efficiency Honor Fidelity". To the top is a soldered on loop and ring, which holds 2 1/2 inches of red ... Read and See More

An Efficiency Honor Fidelity Medal. It is constructed out of a die struck tombak base that has been bronze washed. The round obverse depicts an eagle sitting upon a sword that lays on top of a book, all encircled by the words " Efficiency Honor Fidelity". To the top is a soldered on loop and ring, which holds 2 6/8 inches of red ... Read and See More

The Women's Army Corps (WAC) was the women's branch of the United States Army. It is constructed out of a die stamped sterling silver base that has been gold gilded. The observe depicts the official insignia of the U.S. Women's Army Corps: the Greek goddess Athena. The hollow back reverse has a horizontally soldered on pin, hinge and catch ... Read and See More

Cased U.S. Army Insignia Pin by the Nation Silver Company (Genuine Sterling Silver). The observe depicts The US Army seal. The reverse of the eagles is marked “Sterling”. The pin measures approximately 10/16 inches wide by 1 1/8 inches tall. The pin is attached to pressed paper, which is maker marked “Sterling Silver”. The original box is made of cardboard and measure ... Read and See More

This was worn by American members of the US European Rod and Gun Clubs during the 50’s to 70’s. Mostly hunters wore the badges, but were available to all members of the clubs. It is constructed out of a die struck multi piece copper base that has been riveted/soldered together and contains multi-color enamel work.The observe depicts a ... Read and See More

Six piece US Metal Insignia Group ... See More

Three sleeve badges, 2 rank chevrons, 2 sharpshooter marksman badges, ribbon bar. ... See More

Neat pieces! They are constructed out of a die stamped bronze base that has been bronze washed and contains blue enamel work. The obverse’s features a reverse blue swastika. The full back reverse’s have a well working catch, pin and hinge assembly. One is missing all of its enamel the other retains 80%. I was told that the color ... Read and See More

Fifth Army Sleeve Badge, Combat Infantryman’s Badge, Sharpshooter Marksman Badge, Collar Dog, 2 Rank Chevrons and 3 Pins. ... See More

10 US Medal Bars. 9 of 10 pins work well. They each measure approximately 1 3/8 wide by 3/8 of an inch tall. ... See More

A US Army Marksman Badge with a Rifle Clasp. It is constructed out of a die struck blackened sterling silver alloy. It depicts a Maltese style cross with a black pebbled surface and an outlying silvered border. Below the cross are two loops attached to a “Rifle” clasp. The fullback reverse shows a well working pin hinge and catch assembly. ... Read and See More

A US Army Marksman Badge with a Rifle Clasp. It is constructed out of a die struck blackened sterling silver alloy. It depicts a Maltese style cross with a black pebbled surface and an outlying silvered border. Below the cross are two loops compacted by a “Hand Grenade” clasp. The fullback reverse shows a well working pin hinge and catch ... Read and See More

Here we have a 1968 Hubert H. Humphrey “HHH” Campaign Pin! It is die struck and gold gilded. A nice piece! ... See More

U.S. Army Achievement Medal
The Achievement Medal was first proposed as a means to recognize the contributions of junior officers and enlisted personnel. The United States Army issued their own versions of the Army Achievement Medal in 1981. Effective 11 September 2001, the Army Achievement Medal may be awarded in a combat area. Since this change over sixty thousand Army Achievement ... Read and See More

Original Vietnam era manufacture. Standard issue M6 Aerial Utility knife . Overall shows light wear and use to the blade and grip with good finish and a few spots of surface corrosion.plastic grip is sound with no chips or missing sections. Standard green plastic sheath with green canvas belt loop and pommel strap. ... See More

WWII US Marine Carps fighting knife nicely marked with single fuller and worn blade. Original leather scabbard. ... See More

United States regulation Civil War-Vintage Heavy Cavalry Trooper's Saber by the premire sword maker of the era, Ames Mfg. Co. of Chicopee Ma. this features a heavy curved 39 inch long bright blade with a broad fullers. Original black leather grip with double twist brass wire wrap, brass pommel and two-branch half basket guard with leather buffer pad. The undented, blued ... Read and See More

Contemporary production Model 1852 US Navy Officer sword by Hilborn Hamburger NY. Beauty etched SS blade is triple etched. The 28" blade indicated he was 5'6"-5'7" tall. The gilt hilt has USN in the basket. Composition faux ray-skin grip with triple brass wire wrap. The scabbard is black leather with gilt brass fittings. The upper scabbard ring is missing. ... See More

A 19th century American fraternal sword for the Knights of Pythias. This is modeled after the 1872 cavalry saber, the 27 inch blade etched with florals, society symbols and owner's name Major W.C. Rapp of 9th Regt. U.R.K.P., Marion Ohio. The Blade is WKC stamped. Gilt brass three bar hilt with lion head pommel, the guard molded with ... Read and See More

Rare, especially with a surviving scabbard!! Made at the Springfield armory for the M1835 and M1842 musket. The M1842 musket was used extensively through the Civil War. This has a US marked triangular blade, (later made illegal due to the difficulty caring for these wounds). The scabbard is a 1839 pattern designed for the shoulder belt attachment. It has black leather ... Read and See More

For use with present day USMC sword. Last pic is just to show the set with the sword. ... See More

United States Army Civil War Vintage Mod. 1850 Foot Officer's Sword (rank of Captain and Lieutenant). Made by Henry Sauerbier & Co., Newark, New Jersey. Slightly curved blade is engraved and etched with military designs, federal shield, U.S., floral designs, and maker's mark. Ornate brass D-Guard is cast with floral design and "U.S." in the hand-guard. The "U.S." in ... Read and See More

United States Army Non-Commissioned Officer’s Sword, Civil War vintage, by The Ames Manufacturing Co., Chicopee Mass. Straight 32" bright blade, with one large fuller. Several nicks to cutting edge. Solid cast brass grip assembly consisting of globular shaped pommel, ribbed grip, large knuckle bow with bi-lobed guard finished with a finial. Red buffer pad is in place. Scabbard is black ... Read and See More

United States Army Musicians Sword, Civil War Vintage, by The Ames Manufacturing Co., Chicopee, Mass. Straight 28" bright blade with one large fuller. Age greyed. Solid, cast-brass grip assembly consisting of globular-shaped pommel, ribbed grip, and large knuckle-bow finished with a finial, red felt buffer pad is in place. Scabbard is black leather with brass drag and throat piece with a ... Read and See More

Made by Aerial Cutlery Co. during Vietnam era for the US M14 rifle. Blade and hardware ate parkerized. Black plastic grips. Model M8A1 olive drab scabbard. ... See More

Made at Springfield Armory for the Model 1873 trapdoor Springfield rifle. This has a triangular spike blade and the correct blued scabbard. This is the early version with brown leather belt loop made at Watervliet Arsenal with a clear "A.R." Smith inspector stamp and brass US rossette. ... See More

This specimen is a Model 1840 Artillery Saber and scabbard, the type carried by enlisted men of the U.S. Army Horse Artillery, a relatively small branch of the federal military. It was made by the Ames Manufacturing Company of Chicopee, Massachusens, the leading supplier of swords to the U.S. armed forces. The Model 1840 proved to bo a solid, well-designed ... Read and See More

US Vet obtained group for a US Army Air Corps Staff Sargent. Distinguished Flying Cross, Air medal. there was a photo with this group but I do not know if it's the guy. ... See More

4 pieces of US Army WWI insignia. One Captain Insignia & a pair of LtCol insignias. In World War I United States soldiers received stripes called Wound Chevrons that were influenced by French practice. These looked exactly the same as Overseas Service Chevrons, but were always gold metallic-thread and worn on the lower right sleeve. (At that time the gold Overseas Chevron ... Read and See More

WWII issue in brass w disk to reverse. ... See More

US Army Honorable Discharge Emblem Lozenge. Ruptured duck. ... See More

US Army Strategic Command (STRATCOM) Patch. Machine embroidered Yellow, orange and white thread. Lightning bolt through globe on shield. Uniform Removed. Measures approximately 2 inches wide by 2 ½ inches tall. Nice. ... See More

Machine embroidered Yellow, orange and white thread. Lightning bolt through globe on shield. Uniform Removed. Measures approximately 2 inches wide by 2 ½ inches tall. Minor soil. Nice. ... See More

SP2 (1955‐1959) Spec/5 (1959‐1985). Machine embroidered goldenlite yellow arcs and eagle on a green backing. Minor soil and treads. Measures 3 inches wide by 3 ¼ inches tall. ... See More

Machine embroidered Yellow, orange and white thread. Lightning bolt through globe on shield. Uniform Removed. Measures approximately 2 inches wide by 2 ½ inches tall. Nice. ... See More

WW2 U.S. Army Wool Four Overseas Service Bar Patch (2 Years). Gold strips on green wool. Measures 2 inches tall by 1 5/8 inches wide. ... See More

WWII US Army Technician 5th Grade Enlisted Rank Chevron. Tech Corporal, pay grade 5. Two chevrons above “T”. Machine embroidered. Measures 3 1/16 inches wide by 3 ¾ inches tall. ... See More

WWII US Army AAF - IX Aviation Engineer Command Patch. Shield shaped. Machine embroidered. Measures 2 ½ inches wide by 3 1/8 inches tall. ... See More

US Navy Shoulder Straps in Case. Shipping will be more expensive as it is a larger item. This has been taken into consideration when pricing this item. Thanks. ... See More

Approx 3" x 1.5" patch. ... See More

24 items in total: 11 - 1918 Wisconsin Newspapers, 6 - 1916 James River Bank Calendar Cards (WWI ship themed calendar), 3 Newspaper Clippings, 2 Stamp Albums, and 2 Booklets. Four of the calendar cards appear to have had the calendar part cut off. The front page of "The Atrocities of Germany" is not attached. A cool grouping! ... See More

Fifty black and white US press photos. All slightly curved inward. These from Pacific theatre all WWII era. They each measure 4 1/2 inches wide by 3 1/2 inches tall. ... See More

A 2 7/8 inches wide by 5 5/16 inch tall foldable paper pamphlet. Came in as part of a veteran lot. ... See More

Approx 14"x 11" print by RB Ash, war artist. Print is dated 2003. Original dedication and signature in blue ink. ... See More

31 photos and other miscellaneous documents/letters/cards. Less than $1 each! ... See More

Two pressed cardboard photos. WWII United States General G. O. Squier-class Navy Transport Ship General A. W. Brewster AP-155 USS General A. W. Brewster (AP-155). WWII United States Tacoma-class frigate USS Allentown (PF-52) USS Allentown (PF-52)Read and See More

A very neat piece! Printed Poster. Vibrant Colors. Bottom Left reads: “Copyright 1917 (g. b. levee) scroll publishers 68 W. Washington St. Chicago”. Minor rips and tears to edges. The two biggest rips have tape applied to the reverse. It measures 22 ¾ inches tall by 18 inches wide. ... See More

Approx. 20" x 14" shows Mom and Dad worried over their Son's fate overseas. Nice "Sons in Service fag in background. Art work by notable artist Harry Anderson. minor damage as shown. ... See More

Yea, this one came out of a Vet grouping I bought. Dated 1945 it's a flip book with multiple celluloid pages and you flip through them she presents in progressively less and less clothing. ... See More

Life: The War in Iraq: The Illustrated History Hardcover Book ‐ Jun 16 2003 by Editors of Life (Author). Beginning centuries before the rise of Saddam Hussein and continuing in the volatile aftermath of his fall, The War in Iraq: The Illustrated History relates, in vivid words and pictures, the saga of an ancient, beleaguered people. Dramatic, intimate photographs of Gulf War II ... Read and See More

Here we have a grouping of Staff Sergeant Curtis Beatham of the US Army’s document grouping. There are multiple pieces including; two newspapers, “Campaigns of the 36th Infantry Division” poster, “350th Fighter Group” document, 6 postcards/documents, 4 period documents, 7 more recent records and more. Beatham won; Combat Infantryman’s Badge, Good Conduct Medal, Purple Heart, European-African-Middle Eastern Campaign Ribbon with ... Read and See More

As shown, from Veteran estate. ... See More

Heidelberg served at the HQ of US 7th Army Europe from 1952. Nice Sein here with DRGM marked zinc cast top. Bottom of Stein has translucent design. ... See More

A one quart capacity canteen with its cup and Khaki canvas cover. The aluminum canteen is slightly concave to its reverse and retains its black bakelite screw cap, attached between its top and a flange brazed to the base of the neck by a short metal chain. The side of the canteen is engraved "U.S. Massillon Al. Co 1945", while ... Read and See More

Here we have a group of 5 different cast lead ship models all are badly damaged. The bottom is cast with the word "Comet" the manufacturer and the ships individual names. World War II turned small scale ship modeling from a civilian hobby to a military necessity. Accurate identification of friendly and enemy ships and aircraft was necessary to avoid costly ... Read and See More

Here we have a group of 4 different cast lead ship models. The bottom is cast with the word "Comet" the manufacturer and the ships individual names. World War II turned small scale ship modeling from a civilian hobby to a military necessity. Accurate identification of friendly and enemy ships and aircraft was necessary to avoid costly mistakes on the battlefield. ... Read and See More

Here we have a group of 6 different cast lead ship models. The bottom is cast with the word "Comet" the manufacturer and the ships individual names. World War II turned small scale ship modeling from a civilian hobby to a military necessity. Accurate identification of friendly and enemy ships and aircraft was necessary to avoid costly mistakes on the battlefield. ... Read and See More

Here we have a group of 5 different cast lead ship models. The bottom is cast with the word "Comet" the manufacturer and the ships individual names. World War II turned small scale ship modeling from a civilian hobby to a military necessity. Accurate identification of friendly and enemy ships and aircraft was necessary to avoid costly mistakes on the battlefield. ... Read and See More

Here we have a group of 11 different cast lead ship models. The bottom is cast with the word "Comet" the manufacturer and the ships individual names. World War II turned small scale ship modeling from a civilian hobby to a military necessity. Accurate identification of friendly and enemy ships and aircraft was necessary to avoid costly mistakes on the battlefield. ... Read and See More

Here we have a group of 6 different cast lead ship models. The bottom is cast with the word "Comet" the manufacturer and the ships individual names. World War II turned small scale ship modeling from a civilian hobby to a military necessity. Accurate identification of friendly and enemy ships and aircraft was necessary to avoid costly mistakes on the battlefield. ... Read and See More

Vietnam era. Made in New York. A stamped aluminum based green painted construction. The obverse features a red and white medical decal. All closure hinges work well. All of the components are included. ... See More

Here we have a 1966 Vietnam era United States Mess Kit. It is constructed out of a stamped alumni base. It comes complete with a fork, knife and spoon. The closure lid is marked “US Regal 1966 DSA-4-0A2661-TR530”. A neat piece! ... See More

Here we have a US ANB- H 1 Headset by Western Electric. One ear phone is damaged to the leather. Otherwise in great condition. Nice markings. ... See More

Here we have a US .30 Cal Ammunition Box by REEVES. It is made of stamped steel and has been re-painted brown. It reads: “Cal .30ml Ammunition Box” to both sides. And to the front: “Reeves U.S.” and it has the flaming ordnance bomb on it. All of the hocks, hinge and clips work well. It measures 10 ½ X 7 X 3 ¾ inches. ... Read and See More

USA 5 & 10 cent Military Payment Certificates.Series 472 and Series 521. ... See More

A neat little trinket here! I believe it is made out of nickel silver alloy. The front shows a Submarine on a rectangle plate with 4 chain links to either side and a connecting piece to the end clasp piece. The connecting piece may be a later replacement? The reverse shows an etched date reading "23 . XI . 45." (November 23rd 1945). It measures 8 inches ... Read and See More

A two-piece helmet, comprised of a resin-impregnated canvas liner and a Manganese shell, first developed in 1941. The shell retains approximately 95% of its rough-textured olive drab paint to the exterior, and about 95% of its smooth-textured olive drab paint to the interior. The helmet has 1943-45 production swivel bail loops for the chinstrap. Shell is complete with its original two piece olive-drab ... Read and See More

Fixed bale, undented manganese shell. The shell retains 90%+ of its rough-textured olive drab paint to the exterior with some expected wear to its stainless steel rim that meets at the front. Chinstrap is intact. Liner is low pressure type 3 liner produced by the St Clair. with yellow SC stamp in the dome. ... See More

WWII vintage helmet with the the rim seamed to the front. The solid green liner is marked as shown and spots medic markings, (I do not think the liner is WWII). Nice textured green paint strap and functioning chin strap.. ... See More

WWII USAAF Leather flight helmet type A-11 made by the The Selby Shoe Co., Size Large offered in excellent condition. There are no tears and the straps are all intact and undamaged. It is correctly and well marked. The WWII USAAF headset receiver ANB-H-I by The Rola Company, Inc. with all wiring in excellent condition is included. We also include ... Read and See More

Owned by Lt. Robert J. Scott. Post-1968 liner. ... See More

A two-piece helmet, comprised of a liner and a Manganese shell. The shell retains approximately 95% of its rough textured olive drab paint. There is a yellow applied Lieutenant rank bar to the front. Shell is post 1950, green cotton with T1 attachment. Front has shell is complete with its original two piece olive-drab webbed chinstrap and metal fittings. Helmet rim has ... Read and See More

The non-ballistic CVC helmet was a lightly padded crash helmet for wear inside all US armored fighting vehicles during the Vietnam era. This specimen, manufactured by Specialty Plastics, mounts integrated send/receive electronics emblematic of the advances of radio and intercom communications in the post WWII era. Included is a set of goggles with cloth elastic straps. The foam used ... Read and See More

Here we have 8 US Caps. Four are marked, and one has a rip in the top. A good deal! ... See More

U.S. Army Air Corps leather flight crew cap made of fleece lined brown leather with turn-down ear flaps. No maker's tag or size label but is approximately a size 7. The hat has age cracking. The leather is dry. ... See More

A two-piece helmet, comprised of a liner and a Manganese shell. The shell retains approximately most of its rough-textured olive drab paint. Original chinstrap. The high pressure plastic liner has a dark brown and tan vertical stripe design visible to its interior surface, resulting from its segmented construction, but has been painted in rough-textured olive drab to its exterior, which ... Read and See More

Here we have a WWII US Army Officer Visor Cap Badge. Die struck gilded brass. The observe depicts an eagle clutching arrows in one talon and a flower in another, the eagle also has a shield centrally placed on it's chest. To the top is an Insignia emblem, as well as the writing "E Pluribus Unum". The reverse has a ... Read and See More

WWII issue in brass w disk to reverse. ... See More

US M1944 tunic also known as the "Ike" Jacket with 2 caps and small group of insignia/awards. The Jacket is from a US 9th air force vet. ... See More

For use with present day USMC sword. Last pic is just to show the set with the sword. ... See More

USMC – Third Marine Air Wing Tunic & Pants ... See More

Real nice worn shirt here with what appears to be a replaced button on the right pocket. ... See More

Real nice worn shirt here with a repair to the reverse as shown, one broken button minor soil. ... See More

No soil, all buttons intact, the seam at the right picket is ripped a couple inches this is an easy repair if you even care. No holes. ... See More

Khaki wool long sleeve. One pocket button missing and a dot of soil on one pockete. No holes ... See More

Comes with belt, a couple tiny spots of dirt to reverse. One button on upper right pocket is only 1/2 intact and the left is cracked. No holes. ... See More

Nice wool WWII tunic in great shape. comes with shirt and tie. ... See More

It is constructed out of interlocking plated steel with two spring loaded clips and top swivel hook. Minor oxidization. Measures 10 ½ inches long ... See More

Original ... See More