Flags

Deutsche Arbeitsfront (DAF) “Ingolstadt Süd” Einheit Flaggen. This was arranged and assigned to the Deutsche Arbeitsfront on behalf of the Amt für Arbeitseinsatz der DAF. This two sided flag consists of multiple materials and is both machine and hand constructed. The obverse depicts a centrally placed and separately applied, printed cotton DAF emblem, which consists of; a black ... Read and See More

Large original Admiral's Pennant. White cotton/linen construction, "swallow tail" pennant roughly 375cm long and 150cm tall at hoist edge. Pennant features a printed black Iron Cross with narrow inner white stripe border and narrow black outer stripe border to each side. Nicely marked "Fuhrerstd. 1.5X3,75". Shows the expected age, period use and wear. Scarce. ... See More

Here we have a large NSDAP Party Flag that measures approximately 100" X 60". It is a red cotton with printed white roundels and swas'. There is very very minor soil, a few small holes. The 2 corners on the fly end look to have been pinned through, one has a small bite out of it. Likely where some Vet. hung this in ... Read and See More

Nationalflagge/Parteiflagge 1933-45. Here we have a large one sided NSDAP Street banner that measures approximately 194" x 74". It has a printed roundel with swas's. Someone at some point, (likely in the period) has added about 32" on to each end of the banner. There is some very minor soil and some small holes. The top and bottom have been folded over ... Read and See More

NSDAP banner measuring approximately 43" tall x 29" wide including the fringe. This quality NSDAP Banner has some nice work in it. It is a single sided banner with a separately applied roundel with a printed swastika. The color is still strong and there's minor age I see no holes. There are water stains to the roundel. The bottom has a fringe ... Read and See More

Nationalflagge/Parteiflagge 1933-45. It is constructed out of a red dyed cotton base with two separately stitched on white and black printed cotton roundels. The rectangular shaped obverse features a centrally placed black mobile swastika surrounded by a white roundel and red base. The reverse is the same as the obverse. The top bottom and fly edges have been folded ... Read and See More

A rare and beautiful NSDAP Podium Banner. It is constructed out of red cotton, with a white roundel and printed swastika that is lightly soiled. All of this is on a red cotton backing. This measures 25" long. The hoist has has a turned wood pole onto which in nailed a red string. A perfect display piece. ... See More

Nationalflagge/Parteiflagge 1933-45. It is constructed out of a red dyed cotton base with two separately stitched on white and black printed cotton roundels. The rectangular shaped obverse features a centrally placed black mobile swastika surrounded by a white roundel and red base. The reverse is the same as the obverse. The top bottom and fly edges have been folded ... Read and See More

Here we have a display size 2 sided NSDAP Flag (Nationalflagge/Parteiflagge 1933-45). It is constructed out of a red cotton base with two separately stitched on white cotton roundels that have multi-piece black mobile swastikas on them. The rectangular shaped obverse features a centrally placed black mobile swastika surrounded by a white roundel and red base. The reverse is the ... Read and See More

Nationalflagge/Parteiflagge 1933-45. It is constructed out of a red dyed cotton base with two separately stitched on white and black printed cotton roundels. The rectangular shaped obverse features a centrally placed black mobile swastika surrounded by a white roundel and red base. The reverse is the same as the obverse. The top bottom and fly edges have been folded ... Read and See More

A Veteran bring back - Nationalflagge/Parteiflagge 1933-45. It is constructed out of a red dyed cotton base with two separately stitched on white and black printed cotton roundels. The rectangular shaped obverse features a centrally placed black mobile swastika surrounded by a white roundel and red base. The reverse is the same as the obverse. The top bottom and ... Read and See More

A Veteran bring back - Nationalflagge/Parteiflagge 1933-45. Here we have a large one sided NSDAP Street banner that measures approximately 290CM x 95cm, (9.5' x 3'). This was purchased recently from the Veteran's family by me. It has separately applied white roundel with black printed swas. There is no soil, no holes, no rips or damage. The top and ... Read and See More

Measures approx. 90" x 6" this shows minor soil and frays toward the edges, there is a bullion fringe to both ends. Each end has a 4" separately applied roundel and printed silver words. The body of the sash is a silky material. These make for excellent borders to a grouping display. ... See More

Measures approx 32"x 8" NOT including the gold bullion fringe or hanger. This suffers silk rot as shown with holes. It is fragile and will tear of not handled with care. Nice silver bullion chain stitching, "Gewidmet von der NSDAP Ortsgruppe Gechersheim" and "Sei treu und Deutsch" roughlt translated, Dedicated to the NSDAP Ortsgruppe Gechersheim Be loyal and German. The swas. ... Read and See More

Measures approx. 90" x 6" this shows minor soil and a few tiny holes toward the edges, there is a bullion fringe to both ends. Each end has a 4" separately applied roundel and printed silver words. The body of the sash is a silky material. These make for excellent borders to a grouping display. ... See More

Reichskriegsflagge 1.5 x 2.5 (150cm x 250cm). Here's another one that was there! This piece is constructed of a cotton base that has been stitched together and printed in the national colors: red, black and white. The obverse of the flag depicts an off centered mobile swastika on a white round backing, with four white and black lines running to its edges ... Read and See More

Approx 37" x 22" Two sided pennant made of quality heavy cotton. Each piece is a separate piece of cotton all assembled, even the swas. nothing is printed. This flag is bright without any fading. This has two unit numbers, the top being in chain stitched. One of the three hooks remain to the hoist end. Very clean I only see one ... Read and See More

German WWI Era ADAC (Allgemeiner Deutsche Automobil Club) Vehicle/bike Pennant. Approx. 8"x5.5" In good condition but to the reverse is 3 glue spots from where this was mounted in a display unit. Perhaps soaking these spots may remove them but I like to leave as is. ... See More

Here we have a single sided vehicle ID flag that has been signed my some of the GI's unit members. This was a common souvenir in some American units and made a great reminder of the guys in one's unit. To the red flag base is a central stitched on white roundel with a black printed swastika. In there are ... Read and See More

Hoheitszeichen am Kraftwagen für die Übrigen Angehörigen der Luftwaffe. It is constructed out of blue-grey cotton with a white and blue-grey cotton machine embroidered Luftwaffe eagle insignia around a round wire mounting piece. The triangular shaped obverse features a 2nd pattern Luftwaffe eagle with outstretched wings clutching a mobile swastika in one of its talons on a blue-grey ... Read and See More

Hoheitszeichen am Kraftwagen für die Übrigen Angehörigen der Luftwaffe. It is constructed out of sheet metal with a lacquered blue-grey cotton covering with a white and blue-grey cotton machine embroidered Luftwaffe eagle insignia. The triangular shaped obverse features a 2nd pattern Luftwaffe eagle with outstretched wings clutching a mobile swastika in one of its talons on a blue-grey ... Read and See More

Pennant for Kriegsmarine Officers. Measuring approximately 39cm long and 24 cm tall; Two-sided, made of a Kriegsmarine dark blue background with separately applied KM eagles, and it is trimmed along the edges with gold tresse displaying swastikas. Overall, this pennant exhibits use and wear and a bit of tress loss tp the edges. ... See More

Approximately 25" by 22 inches in size. Wool blend material with printed cross and circles. The Lanyard remains on the hoist edge. The flag has some spots and surface soiling from use as well as age toning. Overall very good condition. ... See More

Pennant for Kriegsmarine Officers. Nicely constructed in ribbed rayon with cotton border. The clips are quite correct. Real nice hand embroidered eagles with some wear. ... See More

Pennant for Kriegsmarine Officers. Nicely constructed in ribbed rayon with cotton border. The clips are quite correct. Real nice hand embroidered eagles. ... See More

Cast burnished brass wall plaque. This originally was fixed to a wall? with screws, (I will include). Someone removed it and attached the two parts together with metal. I am including the original set screws from when this was removed from the wall. A very good job was done. This measures approx. 8" wide. Great display item ... See More

Post war produced enamel sign with a few chips. ... See More

DAF-Plakett - “Ehret die Arbeit und achtet den Arbeiter”. It is constructed out of a die cast aluminum allow base that has been black and red enamel painted. The rectangular shaped obverse features: three workers; a blacksmith (in front of an anvil), an architect/scholar, and a farmer (in front of a plowshare), all on a pedestal with the DAF ... Read and See More

Measuring approx 8 x 6" with bust in brass mounted to a piece of oak. ... See More

Nice burnished bronze plaque here is the perfect addition to your Imperial collection. Measured approx. 205mm x 170mm with 2 prongs to reverse. ... See More

Republic of China (Taiwan) Civil (Merchant) Ensign. Flag measures approx 60" x 45". Recovered from US Vet. estate. The end is tattered and worn. This has a ton of work into it all multi-piece constructed. There is a period repair and fly end is tattered. ... See More

Approximately 25" by 22 inches in size. Wool blend material with printed cross and circles. The Lanyard remains on the hoist edge. The flag has some spots and surface soiling from use as well as age toning. Overall very good condition. ... See More

Fahne des Deutschen Kyffhäuserbund. This was the official banner of the Kyffhäuserbund. It is constructed out of a red, black and white printed canvas-cotton base. The obverse features a centrally placed black Kyffhäuser monument on a white roundel and is on top of a black pattée style cross that is bordered in white and lays on ... Read and See More

Awesome Condor Legion flag bearer in silvered zinc. On chest is Spanish Military medal. Total height 39 cm, on a screw-threaded marble base, the standard is not original to the piece and a replacement, when, where, who I do not know. ... See More

WHW Communication Troops Swallowtail Standarte Flag Tinnie, introduced March 16-17th, 1940! This is one of a 20+ piece series of: “The Victorious Flags and Standards of the German Armed Forces” (Die Siegreichen Fahnen und Standarten der Deutschen Wehrmacht). It is constructed out of an injection molded grey bakelite base that has been silver washed and yellow and black painted. The obverse ... Read and See More

A neat piece! It is constructed out of a red silk base with stitched on silk/rayon insignia, silvered print and gold bullion fringe. The rectangular shaped obverse features stitched on white roundel with a black mobile swastika on it below “Die kameraden der” in silvered gothic print and to the other side is an Iron cross below “Fahrkolonne 8” in ... Read and See More