Belt Buckles

Here we have an aluminum based, die struck, two piece army dress buckle and black/brown leather belt. The obverse depicts an embossed closed winged Heer eagle griping a swastika in its talons. The eagle is above a half oak leaf and acorn wreath and underneath: "GOTT MIT UNS" (God with us). The wreath and motto are in front of ... Read and See More

This rig was worn but just enough so you know it's real. Approx 45mm diameter, two piece die struck buckle with excellent details and correct pebbled background for the eagle. Front is slightly vaulted and crimped over the circular reverse plate. This buckle is unmarked. Included is a early war pattern brocade belt with a army green wool backing. The ... Read and See More

A beautiful piece! It is constructed of two pieces of die stamped/struck aluminum-alloy that have been silver washed. The obverse roundel depicts a closed winged Heer eagle facing left griping a mobile swastika in its talons on a textured round background. The eagle is above a half oak leaf and acorn wreath that is tied together at the bottom ... Read and See More

A great looking belt! It is constructed out of a two pieces of blackened/brown leather. One end has been folded over and stitched over an steel catch. The interior shows a stitched on tongue which has several puncture holes to it. It also is size stamped "90" and "H". The belt measures approximately 38 inches long. The leather is in great ... Read and See More

A fine example of an Imperial Prussian Army Belt Buckle! The buckle is constructed out of a die struck, steel base that has been dark-blue/black painted. The obverse depicts the Imperial king's crown which is then encircled by detailed lines and enclosed by two twisted ropes. The crown is above a laurel leaf and berry wreath and below the ... Read and See More

Here we have an alloy based, die struck and officers open claw belt buckle it would be for a 45mm belt. The obverse shows a pebbled square buckle with two prongs. This is an unmarked example and could have been used on military or political coats. ... See More

Here we have an Imperial Prussian Army Belt Buckle. The two piece belt buckle is constructed out of a die struck, brass/nickel base that has been silver washed and gold gilded. The front silvered roundel depicts the Imperial king's crown which is then encircled by detailed lines and enclosed by two twisted ropes. The crown is above a laurel ... Read and See More

Here we have an alloy based, die struck and officers open claw belt buckle it would be for a 55mm belt. The obverse shows a pebbled square buckle with two prongs with silver wash. This is an unmarked example and could have been used on military coats. ... See More

Here we have an Imperial Prussian Army Belt Buckle. The two piece belt buckle is constructed out of a die struck, brass/nickel base that has been personalized, "Vary Mard"?, really not sure but looks quite period to me. The front silvered nickel roundel depicts the Imperial king's crown which is then encircled by detailed lines and enclosed by two ... Read and See More

Here we have a two piece brass/nickel based, Imperial Prussian Army Belt Buckle. The front depicts the Imperial king’s crown which is then encircled by detailed lines and enclosed by two twisted ropes. The crown is above a laurel leaf pattern and below the Army motto: "GOTT MIT UNS" (God with us). The buckle shows nice age patina ... Read and See More

Here we have a steel based, single piece, green painted Imperial Prussian Army Belt Buckle. The front depicts the Imperial king’s crown which is then encircled by detailed lines and enclosed by two twisted ropes. The crown is above a laurel leaf pattern and below the Army motto: “GOTT MIT UNS” (God with us). The buckle retains beautiful paint ... Read and See More

A tabbed one! It is constructed of a single piece of die struck steel that has been green painted. The obverse roundel depicts a closed winged Heer eagle griping a mobile swastika in its talons on a smooth round background. The eagle is above a half oak leaf and acorn wreath that is tied together at the bottom and is ... Read and See More

Here we have an Imperial Prussian Army Belt Buckle. The buckle is constructed out of a die struck, steel base that has been green painted. The obverse depicts the Imperial king’s crown which is then encircled by detailed lines and enclosed by two twisted ropes. The crown is above a laurel leaf and berry wreath and below the Army ... Read and See More

Wonderful reference by Angolia. I like this one as you get both EM and Office Buckles. Out of print and originally published in 1981. Minor wear to corners. ... See More

A 1st Pattern - Luftwaffe Koppelschloß by J.D. Julius Dinnebier of Lüdenscheid. Instituted 1935. The buckle is constructed out of a die struck aluminum alloy base that has been silver washed. The obverse features a centrally placed 1st pattern ‘droop tail’ Luftwaffe open winged eagle clutching a swastika in one of its talons, on top of an oval pebbled ... Read and See More

A highly desired buckle among collectors! This one is the earlier first pattern variation, that is in excellent condition. It's a very short run "crank catch"! Very nice! It is constructed out of a single piece, die struck aluminum that has been silver washed. The obverse depicts a centrally placed, first pattern, Luftwaffe open winged, droop tail eagle clutching a ... Read and See More

Here we have an alloy based, die struck and officers open claw belt buckle it would be for a 55mm belt. The obverse shows a pebbled square buckle with two prongs with silver wash. This is an unmarked example and could have been used on military coats. ... See More

Nice quality, roughly 42mm wide, 100cm long, bright, silver/aluminum brocade belt with a unique brass buckle, retaining tongue and a silver, alloy, Bavarian officer’s buckle. The belt features 10mm wide, evenly spaced, blue, parallel, horizontal stripes. The buckle end of the belt is folded over to the reverse and stitched down to secure the buckle in place. The ... Read and See More

Constructed out of a heavy die struck, tombac base that has been gold gilded. The obverse depicts a fouled anchor above a lined background which is all encircled by a laurel leaf and berry wreath that is tied together at the bottom. The reverse shows a mirror image of the front. This example is unmarked the one keeper remains. It ... Read and See More

An Imperial German Navy (Kaiserliche Marine) Officer’s Daily Service Belt and Buckle. The buckle is constructed out of die stamped brass that has been gold gilded. The round shaped obverse features a “W” (King Wilhelm’s cypher) on top of a fouled anchor, which is below a Prussian style kings crown and is surrounded by a laurel leaf and ... Read and See More

I just love the look of these! It is constructed out of a die struck, aluminum base that has been gold gilded. The obverse depicts a fouled anchor above a lined background which is all encircled by a laurel leaf and berry wreath that is tied together at the bottom. There is a scratch to the front, NOT a crack. ... Read and See More

A rare piece! It is constructed out of a die struck, nickel base that has been silver washed. The obverse depicts a fouled anchor above a lined background which is all encircled by a laurel leaf and berry wreath that is tied together at the bottom. The reverse shows a slightly concave and smooth backing. It is clearly maker marked " ... Read and See More

Here's a quality example with both keepers. Approx. 60MM diameter buckle this is a die struck zinc silvered with polished highlights. There is some wear to the front. It goes nicely with the bullion brocade belt. The dark navy wool to the reverse is in fine condition with minor wear and soil. The hanger clips are correctly hidden under the ... Read and See More

Here's an early quality, die struck, brass based, gold gilded navy undress belt buckle! The obverse depicts an anchor and rope on a lined background which is all encircled by a laurel leaf wreath. The reverse is concave and smooth. It measures approximately 1 1/2 inches wide by 1 1/2 inches high. A great example with honest wear. ... See More

Here's a quality die struck, aluminum based gold guiled navy undress belt buckle! The obverse depicts an anchor and rope on a lined background which is all encircled by a laurel leaf wreath. It measures approximately 1 1/2 inches wide by 1 1/2 inches high. It only has one keeper. Nice gilding! ... See More

Here we have a Deutsches Jungvolk Koppelschloß by RZM UE 72 that was introduced in 1933. It is constructed out of a single piece of die struck brass that has been copper flash coated, nickel-silver plated. The rectangular shaped obverse features a centrally placed bronze Sigrune (The Deutsche Jungvolk emblem) which lies on a smooth silvered backing. The reverse has a soldered ... Read and See More

Hitler-Jugend Koppelschloß by RZM M4/38 (Richard Sieper & Söhne, Lüdenscheid). Introduced in 1936. It is constructed out of an injection molded aluminum-alloy base that has been silver washed. The obverse roundel depicts a closed winged HJ eagle clutching an HJ diamond within its talons on a pebbled round background. Above the eagle is the Hitler Youth motto reading: “Blut und ... Read and See More

Rare buckle by RZM M4/38 (Richard Sieper & Söhne, Lüdenscheid). It is constructed out of an injection molded aluminum-alloy base that has been silver washed. The obverse depicts an open winged eagle clutching an Student diamond within its talons on a smooth background all framed in a oakleaf rectangle. The reverse is maker marked “RZM M4/38. It features an ... Read and See More

Hitler-Jugend Koppelschloß by RZM M4/24 (Friedrich Linden, Lüdenscheid). Introduced in 1936. It is constructed out of a single piece of die struck steel that has been coper flash coated and nickel-silver plated. The obverse roundel depicts a closed winged HJ eagle clutching an HJ diamond within its talons on a pebbled round background. Above the eagle is the Hitler Youth ... Read and See More

Here we have a Deutsches Jungvolk Koppelschloß that was introduced in 1933. It is constructed out of a single piece of die struck brass that has been copper flash coated, nickel-silver plated. The rectangular shaped obverse features a centrally placed bronze Sigrune (The Deutsche Jungvolk emblem) which lies on a smooth silvered backing. The reverse has a soldered on brass based ... Read and See More

Here we have a Deutsches Jungvolk Koppelschloß by RZM UE 72 that was introduced in 1933. It is constructed out of a single piece of die struck brass that has been copper flash coated, nickel-silver plated. The rectangular shaped obverse features a centrally placed bronze Sigrune (The Deutsche Jungvolk emblem) which lies on a smooth silvered backing. The reverse has a soldered ... Read and See More

Here we have an excellent looking HJ Belt Buckle by RZM M4/42! It is constructed out of a die struck steel base that has been silver washed. The obverse roundel depicts a closed winged HJ eagle clutching an HJ diamond within its talons on a pebbled background. Above the eagle is the Hitler Youth motto reading: “Blut und Ehre” (Blood ... Read and See More

Here’s a nice Hitler Youth (HitlerJunge) Belt and Buckle by RZM M4/24 (Friedrich Linden, Lüdenscheid) that was introduced in 1936. It is constructed out of a single piece of die struck steel that has been coper flash coated and nickel-silver plated. The obverse roundel depicts a closed winged HJ eagle clutching an HJ diamond within its talons on a ... Read and See More

Here we have an excellent looking HJ Belt Buckle by RZM M4/110! It is constructed out of a die struck steel base that has been silver washed. The obverse roundel depicts a closed winged HJ eagle clutching an HJ diamond within its talons on a pebbled background. Above the eagle is the Hitler Youth motto reading: “Blut und Ehre” (Blood ... Read and See More

Always nice to find a Crank Catch! It is constructed out of a die struck, steel base that has been silver washed. The obverse roundel depicts a closed winged HJ eagle clutching an HJ diamond within its talons on a pebbled background. Above the eagle is the Hitler Youth motto reading: “Blut und Ehre” (Blood and Honor). This is then ... Read and See More

Here we have a 2nd Pattern NSKK EM/NCO Belt and Buckle that was introduced in 1935. (Nationalsozialistisches Kraftfahrkorps Koppelschloß). The buckle is constructed out of a die stamped steel base that has been silver plated. The obverse roundel depicts an open winged NSKK/SA eagle griping a wreathed mobile swastika in its talons on a smooth round backing. The eagle ... Read and See More

Here we have a NSKK (Nationalsozialistisches Kraftfahrkorps) EM/NCO Belt and Buckle. The buckle is constructed out of a two piece die stamped/struck brass base that has been silver plated. The obverse roundel depicts an open winged SA/NSKK eagle griping a wreathed mobile swastika in its talons on a smooth round background. The eagle is above a half ... Read and See More

Here we have brown leather shoulder straps. This could be used for the SA. The buckle and clips are all made of a steel base that has been nickel plated. Total length is 36" including the buckles. There is one loop attached to the leather. The leather is age crazed but supple and servicable. ... See More

A desirable piece! Steel based, die struck and green painted SS buckle by Rodo. To the obverse of the buckle is a SS eagle with outstretched wings clutching a centrally placed wreath swastika in its talons. The eagle is above the SS motto: "Meine Ehre heisst Treue!" which is in front of a pebbled background that is surrounded by two ... Read and See More

A nice SS (Schutzstaffel) EM/NCO Belt Buckle by Overhoff & Cie., Lüdenscheid, that was introduced in 1927. The buckle is constructed out of a die struck steel base that has been silver washed. The obverse depicts an SS eagle with its tongue sticking out and outstretched wings, clutching a centrally placed wreath static swastika in its talons. The eagle is ... Read and See More

A rare buckle! It is constructed out of a die struck aluminum-alloy base that has silver washed. The round shaped obverse features an SS eagle with its outstretched wings, its tongue sticking out and it is clutching a (centrally placed) wreathed stagnant swastika in its talons. The eagle is above a bannered SS motto which reads "Meine Ehre Heisst Treue." ( ... Read and See More

A beautiful SS (Schutzstaffel) EM/NCO Belt Buckle by Overhoff & Cie., Lüdenscheid, that was introduced in 1927. The buckle is constructed out of a die struck steel base that has been silver washed. The obverse depicts an SS eagle with its tongue sticking out and outstretched wings, clutching a centrally placed wreath static swastika in its talons. The eagle is ... Read and See More

Here's a honest used example of an unmarked Overhoff & Cie (Ludenscheid) SS EM Belt Buckle! It is constructed out of a die struck, single piece steel base that has been silver/grey painted. The obverse depicts an SS eagle with outstretched wings clutching a centrally placed wreath static swastika in its talons. The eagle is above the SS motto: "Meine ... Read and See More

Here's a honest used example of an unmarked Overhoff & Cie (Ludenscheid) SS EM Belt Buckle! It is constructed out of a die struck, single piece steel base that has been silver/grey painted. The obverse depicts an SS eagle with outstretched wings clutching a centrally placed wreath static swastika in its talons. The eagle is above the SS motto: "Meine ... Read and See More

Worn example of a Political Leaders Belt and early brass open claw buckle. The obverse depicts a rectangle. The buckle is unmarked. A thick brown belt is folded over the buckle and stitched to it. It has 14 adjustment holes and sized "110", (cm). The leather is in worn supple condition. A great addition to your collection! ... See More

Here we have an alloy based, die struck and officers open claw belt buckle it would be for a 45mm belt. The obverse shows a pebbled square buckle with two prongs. This is an unmarked example and could have been used on military or political coats. ... See More

Here's an excellent RAD EM/NCO belt buckle! This buckle is constructed out of a two pieces of die struck/stamped aluminum that have been silver washed. The obverse separately applied roundel depicts a RAD logo, which consists of: a mobile swastika above an upright spade shovel head, this lies on a circular pebbled background which is encircled by a ... Read and See More

Here we have a RAD (Reichsarbeitsdiens) Officers Brocade Belt Buckle by Assmann 1937! It is constructed out of a die struck/stamped, aluminum-alloy base that has been silver washed. The obverse depicts a RAD logo, which consists of: a mobile swastika above an upright spade shovel head, this lies on a circular pebbled background which is encircled by a pebbled ring ... Read and See More

Here’s an early Reichsarbeitsdienst (RAD) EM/NCO Belt Buckle by Richard Sieper & Sohne 1936! Introduced in 1936. It is constructed out of an injection molded aluminum-alloy base that has been silver washed and burnished. The obverse roundel depicts a RAD logo, which consists of: a mobile swastika above an upright spade shovel head, this lies on a circular rough background which ... Read and See More

A rare piece to find! The rectangle buckle is constructed of a single piece of die struck aluminum that has been silver washed with a black painted swastika. The obverse depicts an embossed open winged DLV eagle griping a wreathed black mobile swastika in its talons on a pebbled background that is surrounded by a laurel leaf and berry wreath ... Read and See More

Here we have a 1st pattern RLB EM/NCO Belt Buckle. The first pattern RLB EM/NCO’s buckle was almost identical to the buckle worn by the DLV (Deutscher Luftsport Verband). It is constructed out of a single piece of die struck brass that has been silver washed and black enamel painted. The obverse roundel depicts an open winged ... Read and See More

Here we have the early pre-1938 version. a 1920 version of the German Red Cross Buckle. This piece is constructed in die-struck brass with nickle plating. This has a Red Cross logo in the center being surrounded by a rope and wreath. This buckle has wear yet remains in great condition! This piece can be found in "German Belt Buckles 1845-1945" ... Read and See More

Rare buckle! Aluminum die cast buckle, marked Ges.Gesch. 1; minor contact marks, in slightly worn condition, just enough wear so you know it's real! ... See More

Roughly,55mm wide, 50mm tall, horizontally oval, stamped, two piece, burnished aluminum, belt buckle features a highly embossed oak-leaf wreath encompassing a right facing, political style eagle with out-stretched wings on a slightly domed, pebbled central field. Both eagle and wreath feature nice detailing. Reverse of buckle is flat and has a separate circular plate insert with crimped catch and ... Read and See More

Here we have a Private Forestry Buckle that was introduced in 1938. It is constructed out of a die struck aluminum-alloy base that has been copper flash coated and burnished. The oval shaped obverse features a pebbled center surrounded by an oak leaf and acorn wreath that is tied together at the bottom. The reverse features a crimped on catch and ... Read and See More

Rare buckle by RZM M4/38 (Richard Sieper & Söhne, Lüdenscheid). It is constructed out of an injection molded aluminum-alloy base that has been silver washed. The obverse depicts an open winged eagle clutching an Student diamond within its talons on a smooth background all framed in a oakleaf rectangle. The reverse is maker marked “RZM M4/38. It features an ... Read and See More

Plated steel constructed buckle with separately affixed miners insignia with minor wear. These were used through-out the pre-war and post-war era, when this one was made, who knows. I’m calling it post-war. ... See More

Gilt steel constructed buckle with separately affixed miners insignia with minor wear. These were used through-out the pre-war and post-war era, when this one was made, who knows. I’m calling it post-war. ... See More

These were used through-out the pre-war and post-war era, when this one was made, who knows. I’m calling it post-war. Die stamped nickel with brass fittings. The gilt insignia has been bolted on ... See More