Accoutrements

M1934 Reichsarbeitsdiens (RAD) Hänger für den Haumesser der Mannschaften und Unterführer. This would be most appropriate for an early “full-stag” RAD Hewer. It is constructed out of multiple piece of blackened leather that have been stitched together. This shows wear and someone has oiled it at some point. The center portion has a stitched on slide. The ... Read and See More

Model 1938 - Technische Nothilfe (TeNo) Hänger für den Hauer der Mannschaften und Unterführer by F. W. Assmann & Sohn of Lüdenscheid. It is a multi-piece construction, made out of blackened leather that has been stitched and riveted together with an aluminum alloy clip and black painted steel rivet. The grip strap has broken off as you see ... Read and See More

Unissued - Wehrmacht Heer (WH) Dolch Portepee für Offiziere. It is constructed out of a wood and white cotton string base that is wrapped in braided, flat and rolled silver-aluminum thread. It is approximately 42cm in length. Comes with its issue paper tag. Mint. ... See More

A very rare early brass marked set! The clips, buckles, regain chain and bands are all brass based and have been gold gilded. The buckles depict four matching lion heads and the backs are semi-hollow. The lion face head and mane all show beautiful detail throughout! The black obverse ribbed rayon shows honest wear. The back shows black felt shows ... Read and See More

A set of Model 1935 Army Dagger Hangers (Heer Dolchgehänge) for an Army Generals Dagger. The back connector and clips are constructed out of an injection molded zinc-alloy base that has been gold gilded. The blucked and bands are constructed out of an aluminum alloy base that have been gold gilded. The grommets are zinc and the prongs are aluminum. ... Read and See More

A Deluxe set of Model 1935 Army Dagger Hangers (Heer Dolchgehänge). The back connector, buckles, bands and clips are constructed out of an injection molded aluminum-alloy base that has been silver washed. They all depict beautiful detail with either pebbling or oak leaves and acorns throughout. The grommets are niuckel-silver and prongs are aluminum. All of the components are held ... Read and See More

A Deluxe set of Model 1935 Army Dagger Hangers (Heer Dolchgehänge). These have a tan cloth backing and some say these are intended for a DAK tropical uniform. The back connector, buckles, bands and clips are constructed out of an injection molded zinc-alloy base that has been silver washed. They all depict beautiful detail with oak leaves and acorns throughout. ... Read and See More

M1935 Army Dagger Hangers (Heer Dolchgehänge). These have a tan cloth backing and some say these are intended for a DAK tropical uniform. The back connector, buckles and bands are all constructed out of an aluminum-alloy base that has been silver washed. The buckles and bands depict beautiful oak leaves and acorns throughout. The clips are nickel silver based ... Read and See More

Horseshoe Super Deluxe set of Model 1935 Army Dagger Hangers (Heer Dolchgehänge). These are quite unique in that the bottom clips have are intended for Deluxe RAD Leader Handers. The patina is all the same and the stitching has not been touched so I’m confident its been this way since the period. The horseshoe back connector, buckles, bands and ... Read and See More

A Super Deluxe set of Model 1935 Army Dagger Hangers (Heer Dolchgehänge). The back connector, buckles, bands and clips are constructed out of an injection molded zinc-alloy base that has been silver washed. They all depict beautiful detail with oak leaves and acorns throughout. The grommets and prongs are intact. All of the components are held together with two straps ... Read and See More

A Deluxe M1937 Luftwaffen Dolchgehänge. The back connector, buckles, bands and clips are all constructed out of an injection molded zinc alloy base that has been burnished. They all depict beautiful oak leaves and acorns throughout. The grommets and the prongs are steel based and lightly oxidized. All of these components are held together with two straps. They are ... Read and See More

A M1937 Luftwaffen Dolchgehänge. The back connector, buckles, bands and clips are all constructed out of a die struck zinc alloy base that has been silver washed. The bands and buckles have been black burnished and nicely display oak leaves throughout. The ends of the two clips show that hint of detail with a decorative random pebbled design throughout. ... Read and See More

A Deluxe M1937 Luftwaffen Dolchgehänge. The back connector, buckles, bands and clips are all constructed out of an injection molded zinc alloy base that has been burnished. They all depict beautiful oak leaves and acorns throughout. The grommets and the prongs are steel based and lightly oxidized. All of these components are held together with two straps. They are ... Read and See More

Assmann Pattern - Deluxe M1937 Luftwaffen Dolchgehänge. The back connector, buckles, bands and clips are all constructed out of an injection molded zinc alloy base. They all depict beautiful oak leaves and acorns throughout. The grommets and the prongs are steel based. All of these components are held together with two straps. The straps are constructed out of a ... Read and See More

Here we have a deluxe Army Horseshoe Hangers! The die struck buckles, horseshoe back piece, clips and bands are made out of an alloy base that has been silver washed. They all depict oak leaves and acorns throughout. The two clips and back connector are all "D.R.G.M." stamped. The stitching, flatwire and reverse felt are in good ... Read and See More

Here we have a beautiful set of deluxe Army hangers! The die struck buckles, back piece, clips and bands are made out of an alloy base that has been silver washed. They all depict oak leaves and acorns throughout. The two clips are "D.R.G.M." stamped. The stitching, flatwire and reverse felt are in excellent condition! The top ... Read and See More

Here's a nice set! The die struck buckles and bands are made out of zinc base that has been silver washed and depict oak leaves and acorns throughout. The clips and back piece are made of a zinc-alloy base that have been silver washed. The well working clips have a nice decorative pebbled design to them. The top fitting is ... Read and See More

A nice looking Deluxe 2nd Model Luftwaffe Hanger set here! The die struck buckles, back connector, bands and clips are all made out of an alloy base and have been darkened and gold gilded. All of these components depict great detail with oak leaves and acorns throughout. The cloth is in excellent shape! just minor wear. All of the clips ... Read and See More

A nice looking Deluxe 2nd Model Luftwaffe Hanger set here! The die struck buckles, back connector, bands and clips are all made out of an alloy base and have been gold gilded. All of these components depict great detail with oak leaves and acorns throughout. The cloth is in excellent shape! just minor wear. All of the clips are in ... Read and See More

A nice looking Deluxe 2nd Model Luftwaffe Hanger set here! The die struck buckles, back connector, bands and clips are all made out of an alloy base and have been gold gilded. All of these components depict great detail with oak leaves and acorns throughout. The cloth is in excellent shape! just minor wear. All of the clips are in ... Read and See More

Worn example still quite serviceable with plating loss. ... See More

Unmarked well worn black belt loop appropriate for an SS dagger or NSKK. ... See More

Beautiful unmarked hanger setup with all supple leather and even patina. ... See More

Here we have a two-piece M33 SS Hanger (SchutzStaffe Dolchgehange). It is constructed out of unmarked black leather with steel black enamel painted rivet, a steel multi-piece RZM marked snap, steel d-loop, nickel plated buckle and clip. The leather is in good condition showing typical age wear and minor cracking to the stress points. All components continue to work well. ... Read and See More

Technische Nothilfe (TeNo) Hänger für den Hauer der Mannschaften und Unterführer by F. W. Assmann & Sohn of Lüdenscheid. It is a multi-piece constructed, made out of brown leather that has been stitched and riveted together with an aluminum alloy clip and prong. Very nice leather. It measures 7 3/8 inches long by 2 1/8 inches wide. The majority of these ... Read and See More

You will never find another!! So this is an axe hanger similar to one shown here. So these come in many shapes and designs. This one has an elastic,(that's lost it's springyness) to go between the head and the spike. The distance now is approx 10" between these ... Read and See More

POST-WAR M1937 Landzollbeamte Dolchgehänge. The back connector, buckles and bands are constructed out of an injection molded aluminum-alloy base that has been silver washed. The clips are zinc based and silver washed. The bands and slides are original and made for army hangers. The clips are original with random pebbling to the ends. Both clips continue to work well. ... Read and See More

It is constructed out of interlocking plated steel with two spring loaded clips and top swivel hook. Minor oxidization. Measures 10 ½ inches long ... See More

Heer Schwertgehänge by Ewald Lüneschloss of Solingen. It is constructed out of two pieces of brown leather that have been stitched together, with a green velvet backing, a pebbled silver washed finezinc clip and a steel round wire d-loop to the top. The obverse base is maker marked. The clip continues to work well. The reverse velvet shows ... Read and See More

Worn. All the clips work well. ... See More

Aluminum - M1935 Army Dagger Hangers (Heer Dolchgehänge). The back connector, buckles, bands and clips are all constructed out of an injection molded aluminum/alloy base that has been silver washed. The buckles and bands depict beautiful oak leaves and acorns throughout. The grommets are steel or aluminum based and plated. The prongs are either steel or aluminum. All ... Read and See More

A Super Deluxe set of Model 1935 Army Dagger Hangers (Heer Dolchgehänge). The back connector, buckles, bands and clips are constructed out of an injection molded zinc-alloy base that has been silver washed. They all depict beautiful detail with oak leaves and acorns throughout. The grommets and prongs are intact. All of the components are held together with two straps ... Read and See More

M1935 Army Dagger Hangers (Heer Dolchgehänge). The back connector, buckles, bands and clips are all constructed out of an injection molded alloy base that has been silver washed. The buckles and bands depict beautiful oak leaves and acorns throughout. The grommets are steel based and plated. The prongs are either steel or aluminum. All of these components are held ... Read and See More

Early Issue tombak Army Dagger Hangers. The die struck: buckles, clips, loops, bands and back connector are constructed out of tombak base that has been silver washed. The bands and buckles depict oak leaves and acorns throughout over a decorative lined background. The stitching and flatwire are well worn. The two clips are in well working condition. Nice patina and ... Read and See More

A Deluxe set of Model 1935 Army Dagger Hangers (Heer Dolchgehänge). The back connector, buckles, bands and clips are constructed out of an injection molded zinc-alloy base that has been silver washed. They all depict beautiful detail with oak leaves and acorns throughout. The grommets and prongs are intact. All of the components are held together with two straps. They ... Read and See More

A Deluxe set of Model 1935 Army Dagger Hangers (Heer Dolchgehänge). The back connector, buckles, bands and clips are constructed out of an injection molded zinc-alloy base that has been silver washed. They all depict beautiful detail with oak leaves and acorns throughout. The grommets and prongs are intact. All of the components are held together with two straps. They ... Read and See More

M1934 Reichsarbeitsdiens Hauer Dolchgehänge 1937. It is constructed out of multiple pieces of leather that have been stitched together and connected with a steel loop and clip. The reverse of the well working clip is marked “A" and has the RAD triangle and date '37. nice example. ... See More

A Deluxe M1937 Luftwaffen Dolchgehänge. The back connector, buckles, bands and clips are all constructed out of an injection molded zinc alloy base that has been burnished. They all depict beautiful oak leaves and acorns throughout. The grommets and the prongs are steel based and lightly oxidized. All of these components are held together with two straps. They are ... Read and See More

Scarce ... See More

Normally sewn into the tunic. Assmann marked. overall total length is 15" ... See More

A Deluxe M1937 Luftwaffen Dolchgehänge. The back connector, buckles, bands and clips are all constructed out of an injection molded zinc alloy base that has been gold washed, (most call these General's hangers). They all depict beautiful oak leaves and acorns throughout. The grommets and the prongs are steel based and lightly oxidized. All of these components are held ... Read and See More

A Deluxe M1937 Luftwaffen Dolchgehänge. The back connector, buckles, bands and clips are all constructed out of an injection molded zinc alloy base that has been burnished. They all depict beautiful oak leaves and acorns throughout. The grommets and the prongs are steel based and lightly oxidized. All of these components are held together with two straps. They are ... Read and See More

. ... See More

What a great example! The die struck buckles, back clip and bands are made out of an aluminum based construction. The two front clips are made of zinc and have been silver washed. All three clips function well! The stitching, flat-wire and reverse felt remain in impeccable condition despite honest period wear. A great set for your Red Cross Leader ... Read and See More

M1934 Reichsarbeitsdiens (RAD) Hänger für den Haumesser der Mannschaften und Unterführer. This would be most appropriate for an early “full-stag” RAD Hewer. It is constructed out of multiple piece of blackened leather that have been stitched together. The edges show a decorative pressed boarder. The center portion has a stitched on slide. The buckle and prong are ... Read and See More

Model 1932 - Royal Hungarian Air Force NCO Dagger Hangers. The buckles, back connector clip and clip-loops are all constructed out of a stamped bronze base. The buckles show decorative hand enhance. The dagger clips are steel based and continue to work well. The back-connector clip works well. All of these components are held together by two brown leather straps that ... Read and See More

Rare - Modell 1938 Marinebeamte Gehänge für den Offiziersdolch. The buckles, bands and clips are all constructed out of an injection molded zinc alloy base that have been silver washed. The chain is constructed out of a nickel-silver round wire. All of these components are silver washed. The gromets are steel based and plated. The gromet prongs are nickel-silver. ... Read and See More

Deutsche Volkspflege Dolchgehänge für Führer. The buckles, back connector and bands are all constructed out of an injection molded aluminum-alloy (leichtmetall) base that has been silver washed. They all have a hint of detail with a decorative random pebbled design throughout. The two bottom clips are zinc based and silver washed. The gromets are steel based and ... Read and See More

A M1937 Luftwaffen Dolchgehänge. The back connector, buckles, bands and clips are all constructed out of a die struck aluminum alloy base that has been silver washed. The bands and buckles have been black burnished and nicely display oak leaves throughout. The ends of the two clips show that hint of detail with a decorative random pebbled design throughout. ... Read and See More

What a great example! The die struck buckles, back clip and bands are made out of an aluminium based alloy that have been silver washed and depict a decorative pebbled design. The two front clips are made of a zinc base and steel spring and have been silver washed. All three clips function well! The stitching, flatwire and reverse felt ... Read and See More

A Deluxe M1937 Luftwaffen Dolchgehänge. The back connector, buckles, bands and clips are all constructed out of an injection molded zinc alloy base that has been burnished. They all depict beautiful oak leaves and acorns throughout. The top clip is NOT textbook rather a maker variant with smooth pebbled finish. The grommets and the prongs are steel based and ... Read and See More

The reverse is blue/green. and the stitching is gone from the lower section. This is easily glued back together. Very serviceable with period wear. ... See More

Very serviceable with period wear. ... See More

Very serviceable with period wear. ... See More

Very serviceable with period wear and age crazing. ... See More

Very serviceable with period wear. ... See More

Loop has been period repaired. ... See More

An interesting set from an old collection. So nor sure exactly what the deal is with the brown backs. Some have said these are Afrika Corps, others just that these are a variation having nothing to do with Afrika Corps. Regardless an interesting variant. The die struck buckles, back piece, clips and bands are all constructed out of a zinc-alloy ... Read and See More

Deutsche Volkspflege Dolchgehänge für Führer. The buckles, back connector and bands are all constructed out of an injection molded aluminum-alloy (leichtmetall) base that has been silver washed. They all have a hint of detail with a decorative random pebbled design throughout. The two bottom clips are zinc based and silver washed. The gromets are steel based and ... Read and See More

1940 Dated example. The leather has darkened over time. a but dry and quite serviceable. ... See More

M1934 Reichsarbeitsdiens Hauer Dolchgehänge 1937. It is constructed out of multiple pieces of leather that have been stitched together and connected with a steel loop and clip. The reverse of the well working clip is marked “H & Co. 37”. Beautiful leather you are going to be happy with this one! ... See More

Here we have an early three-piece M33 SA/NSKK Hanger. It is constructed out of a brown/black leather base with steel brown enamel painted rivets and a steel snap and nickel-silver buckle and clip. The small strap is a bit unusual and quite original. The leather is in good but worn condition with only the slightest cracking to the ... Read and See More

Deutschen Rotes Kreuz (DRK) Dolchgehänge für Führer. The buckles, back connector and bands are all constructed out of an injection molded aluminum-alloy (leichtmetall) base that has been silver washed. The two bottom clips are zinc based and silver washed. The gromets are zinc based and calcified. All of these components are held together with two straps. They ... Read and See More

A Deluxe set of Model 1935 Army Dagger Hangers (Heer Dolchgehänge). The back connector, buckles, bands and clips are constructed out of an injection molded zinc-alloy base that has been silver washed. They all depict beautiful detail with oak leaves and acorns throughout. The grommets and prongs are steel plated. All of the components are held together with two straps. ... Read and See More

M1935 Railway Dagger Hangers (Deutsche Reichsbahn Dolchgehänge). The back connector, buckles, bands and clips are all constructed out of an injection molded nickel-silver base that has been silver washed. The buckles and bands depict beautiful oak leaves and acorns throughout. The grommets and prongs are nickel-silver based and plated. All of these components are held together with two straps. ... Read and See More

M1935 Army Dagger Hangers (Heer Dolchgehänge). The back connector, buckles, bands and clips are all constructed out of an injection molded alloy base that has been silver washed. The buckles and bands depict beautiful oak leaves and acorns throughout. The grommets are steel based and plated. The prongs are aluminum. All of these components are held together with two ... Read and See More

Here we have an equipment belt loop, made of brown leather. ... See More

A Deluxe M1937 Luftwaffen Dolchgehänge. The back connector, buckles, bands and clips are all constructed out of an injection molded zinc alloy base that has been gold gilded. They all depict beautiful oak leaves and acorns throughout. The grommets and the prongs are steel based and lightly oxidized. All of these components are held together with two straps. They ... Read and See More

M1935 Army Dagger Hangers (Heer Dolchgehänge). The back connector, buckles, bands and clips are all constructed out of an alloy base that has been silver washed. The buckles and bands depict beautiful oak leaves and acorns throughout. The grommets and prongs are brass based. All of these components are held together with two straps. They are constructed out of ... Read and See More

A nice set from the Vet's family last week. The die struck buckles, back piece, clips and bands are all constructed out of a zinc-alloy base that has been silver washed. They all depict oak leaves and acorns throughout. The two clips are in well working condition. The stitching, back felt and flatwire are all in good shape. The detail ... Read and See More

An awesome set! The die struck buckles, back piece, clips and bands are all constructed out of a zinc-alloy base that has been silver washed. They all depict oak leaves and acorns throughout. The two clips are in well working condition. The stitching, back felt and flatwire are all in good shape with the flatwire suffering some age powdering. The ... Read and See More

SA brown leather frog for a Feldherrnhalle SA. This frog was used to carry member's edged weapon in a vertical position during guard duty. Extremely rare. Soft brown (typical SA color) leather. All rivets intact correct factory ring hole to right side. Clearly RZM (up-side-down) as well as "L2/441/39 Kernstück" marked. ... See More

2 matching pieces very heavy brass. ... See More

A Deluxe M1937 Luftwaffen Dolchgehange. The back connector, buckles, bands and clips are all constructed out of a die struck zinc alloy base that has been gold washed. The clips, bands and buckles depict beautiful oak leaves and acorns throughout. The grommets and the prongs are also zinc based. All of these components are held together with two straps. They ... Read and See More

A Deluxe set of Model 1935 Army Dagger Hangers (Heer Dolchgehänge). The back connector, buckles, bands and clips are constructed out of an injection molded zinc-alloy base that has been silver washed. They all depict beautiful detail with oak leaves and acorns throughout. The grommets and prongs are steel plated. All of the components are held together with two straps. ... Read and See More

Deutschen Rotes Kreuz (DRK) Dolchgehänge für Führer. The buckles, back connector and bands are all constructed out of an injection molded aluminum-alloy base that has been silver washed. The two bottom clips are zinc based and silver washed. The gromets are zinc based and calcified. All of these components are held together with two straps. They are ... Read and See More

German Social Welfare Leader Dolchgehänge. The buckles, back connector and bands are all constructed out of an injection molded aluminum-alloy base that has been silver washed. They all have a hint of detail with a decorative random pebbled design throughout. The two bottom clips are zinc based and silver washed. The gromets are steel based and plated. They have ... Read and See More

A Reichsarbeitsdiens Führer Dolchgehänge. The buckles, bands and clips are all constructed out of an injection molded aluminum-alloy base that has been silver washed and burnished. They all have a hint of detail with a decorative pebbled design throughout. All these components are all assembled to two brown leather hanger pieces that have adjustment puncture holes. They have ... Read and See More

An early set of M1935 Army Dagger Hangers (Heer Dolchgehänge). The back connector, buckles, bands and clips are all constructed out of an alloy base that has been silver washed. The buckles and bands depict beautiful oak leaves and acorns throughout. The grommets and prongs are brass based. All of these components are held together with two straps. They ... Read and See More

A Deluxe set of M1935 Army Dagger Hangers (Heer Dolchgehänge). The back connector, buckles, bands and clips are all constructed out of a zinc-alloy base that has been silver washed. They all depict beautiful oak leaves and acorns throughout. The grommets (oxidized) are steel and the prongs are brass. All of these components are held together with two straps. ... Read and See More

Here we have an excellent desired Deluxe Army Horse-shoe Hangers. The die struck buckles, horseshoe back piece, clips and bands are made out of an alloy base that has been silver washed. They all depict oak leaves and acorns throughout. The two clips and back connector are all "D.R.G.M." stamped. The stitching, flatwire and reverse felt are ... Read and See More

Here’s a nice set of army hangers to complete your dagger! The die struck buckles, back connector, clips and bands are all constructed out of a zinc alloy base that has been silver washed. The bands and buckles depict decorative oak leaves and acorns throughout. The stitching, flatwire and reverse green wool remain in good condition with only light ... Read and See More

Here we have a Deluxe set to accompany your Model 1935 Army Dagger (Heer Dolchgehänge)! The back commector, buckles, bands and clips are constructed out of a zinc-alloy base that has been silver washed. They all depict beautiful oak leaves and acorns throughout. The grommets and prongs are steel plated. All of these components are held together with two straps. ... Read and See More

A beautiful Deluxe set to accompany your Army Dagger! The buckles, back clip and bands and clips are constructed out of a zinc-alloy base that has been silver washed. They all depict beautiful oak leaves and acorns throughout. The grommets and prongs are steel plated. All of these components are held together with two straps. They are constructed out of ... Read and See More

Here’s a nice set of army hangers to complete your dagger! The die struck buckles, back connector, clips and bands are all constructed out of a zinc alloy base that has been silver washed. The tops have been period resewn over a tombak fitting. The bands and buckles depict decorative oak leaves and acorns throughout. The stitching, flatwire and ... Read and See More

This would be appropriate for an SA dagger hanger. It is constructed out of a brown leather bade that has been stitched around a pebbled nickel D-loop. It is “RZM L2/5” marked. A nice one! ... See More

It’s rare to find these early tombak/nickel-silver examples! The die struck: clips and grommets are tombak based. The bands, buckles and back connector are made out of a nickel-silver base that has been burnished and silver washed. The bands and buckles depict oak leaves and acorns throughout over a decorative lined background. The obverse stitching and flatwire are ... Read and See More

A privately manufactured elongation for an in-tunic-clip. ... See More

. ... See More

A rare set! The buckles, back connector, bands and clips are all constructed out of an aluminum-alloy base that has been black burnished. There are six steel adjustment loops/gromets that have been black enamel painted. The blackened leather is folded over and stitched together at both ends. It also has black stitching paneling the length of both sides. The ... Read and See More

Here's a nice piece! This 7 inch hanger is made of blackened leather, a steel loop and dome and a stitched on zinc silver washed pebbled, well-working clip. The reverse is brown has is stamped with the SS logo, RZM and "1/38". A great piece to add to your sword! ... See More

These are rare and hard to find, All the fittings are lacquered aluminum. Nice fabric with hardly any wear. Nice velvet backings. ... See More

This is a later one piece SA short hanger with plated steel clip and buckle. We sell these all the time and keeping a picture of the exact one you will get is difficult. These are all in nice shape with minor age. If you require a picture please email us. ... See More

This is an early one piece SA short hanger with nickel clip and buckle. We sell these all the time and keeping a picture of the exact one you will get is difficult. These are all in nice shape with minor age. If you require a picture please email us. ... See More

. ... See More

Wehrmacht Luftwaffen (WL) Dolch Portepee für Offiziere. The ball, stem and slide are all original. The 22cm string is post-war. Correct for either a 1st or 2nd Model Luftwaffe Dagger. ... See More

As shown with wear, the cord is a post-war replacement. an inexpensive way to compete your Army dagger. ... See More

As shown all original with frays. ... See More

The cord id a post-war replacement and the slide is not textbook. ... See More

Worn portepee with post-war replacement cord. Correct "cats anus" dot. ... See More

The bullion threads are damaged at the end. ... See More

Nice quality.

Please if you know what this is attributed to let me know. ... See More

Not sure what this one is, if you know pls do tell me. The wee thread and needle on it can be discarded w no damage. It was on it and I think it was maybe some sort of price tag? not sure just discard it if you wish.

Please if you know what this is attributed to let ... Read and See More

As shown. I'm thinking French or Dutch?

Please if you know what this is attributed to let me know. ... See More

Here we have an unissued Police Bayonet Portepee! The portepee consists of; a flat leather strap, interwoven free slide, metal alloy based stem, crown and ball. The portepee is wood based and wrapped in silver/aluminum wire and green threads. The slide and strap are black, red and silver. The bottom has a recessed hole that shows a green "cats ... Read and See More

This one has been worn and is repaired. ... See More

As shown, has a slit to receive a button? ... See More

As shown ... See More

Reproduction. ... See More

. ... See More

. ... See More

Unknown variation ... See More

. ... See More

Worn. All the clips work well. ... See More

Well worn example ... See More

Original ... See More

If you have the book on foreign daggers by Berger you can check this out. ... See More

. ... See More

Worn example with lots of loose threads but leather is intact. ... See More

Completely made of silver metallic fabric and long fringes on knot, three red strips on band. Double-headed eagle on both side,coat of arms of Austria-Hungary! ... See More

This has the leather separated from the exterior of the strap. the leather is broken but all there.Most I expect would just cut off the leather. ... See More

Beauty sword Portepee with Royal cyper in the stem. ... See More

Shows wear but very serviceable. ... See More

I am listing several portepees from an old collection. These are soiled, faded and worn they are exactly as shown. They are 100% original. ... See More

has some honest wear and age along with a cyper on the stem. ... See More

Here we have a nice SS portepee. The portepee consists of; a strap, interwoven free slide, metal alloy based stem, crown and ball. The portepee is wood based and wrapped in black and silver/aluminum wire threads. The bottom has a recessed hole that shows solid black felt. It’s a beauty with just minor wear! ... See More

Unissued example with some storage age, soil. Some threads were loose to the top of ball and glued back in place. ... See More

Worn example with lots of loose threads but leather is intact. ... See More

Nice Japanese Tassel/portepee. ... See More

I am listing several portepees from an old collection. These are soiled, faded and worn they are exactly as shown. They are 100% original. ... See More

I am listing several portepees from an old collection. These are soiled, faded and worn they are exactly as shown. They are 100% original. ... See More

Army Dress Bayonet portepee. ... See More

Here we have a stunning Police Officers Sword Portepee! The portepee consists of; a flat strap, interwoven free slide, metal alloy based stem, crown and ball. The portepee is wood based and wrapped in silver/aluminum wire threads. The slide and strap are black, red and silver. The bottom has a recessed hole that shows a red, white and black " ... Read and See More

Here we have a stunning Police Officers Sword Portepee! The portepee consists of; a flat strap, interwoven free slide, metal alloy based stem, crown and ball. The portepee is wood based and wrapped in silver/aluminum wire threads. The slide and strap are black, red and silver. The bottom has a recessed hole that shows a red, white and black " ... Read and See More

Here we have a nice SS portepee. The portepee consists of; a strap, interwoven free slide, metal alloy based stem, crown and ball. The portepee is wood based and wrapped in black and silver/aluminum wire threads. The bottom has a recessed hole that shows solid black felt. It’s a beauty with just minor wear! ... See More

Here we have a nice piece! The portepee consists of; a string, round slide, along with a wood based: stem, crown and ball. The portepee is wrapped in an interwoven gold bullion thread. The bottom has a recessed hole with matching bullion dot. It has no frays and has aged and patinaed quite nicely! This type is normally associated with ... Read and See More

Minty ... See More

We have a few of these available all are complete pre-1945 manufactured and without frays. Correct "cats anus" dot. ... See More

Wehrmacht Luftwaffen (WL) Dolch Portepee für Offiziere. They are constructed out of a wood and white cotton string base that is wrapped in flat and rolled silver-aluminum thread. These are approximately 23cm in length. We sell these all the time and keeping a picture of the exact one you will get is difficult. These are all original in nice ... Read and See More

Wehrmacht Heer (WH) Dolch Portepee für Offiziere. They are constructed out of a wood and white cotton string base that are wrapped in flat and rolled silver-aluminum thread. These are approximately 42cm in length. We sell these all the time and keeping a picture of the exact one you will get is difficult. These are all original in nice ... Read and See More

Original rare pre-1945 tag for the FACH manufacturing guild, a consortium of manufacturers distributing daggers and swords during the 3rd Reich. ... See More

Keep your swords and collection safe from the elements in this foam padded quality sword case. Each case is machine stitched, has a sturdy carrying loop and fastens together with a heavy duty cord. Each one is a different colour. Get yours today! ... See More

Keep your dagger and collection safe from the elements in this foam padded quality dagger case. Each case is machine stitched, has a sturdy carrying loop and fastens together with a heavy duty zipper. Each one is a different color. Get yours today! ... See More

Keep your dagger and collection safe from the elements in this foam padded quality dagger case. Each case is machine stitched, has a sturdy carrying loop and fastens together with a heavy duty zipper. Each one is a different color. Get yours today! ... See More

Keep your dagger and collection safe from the elements in this foam padded quality dagger case. Each case is machine stitched, has a sturdy carrying loop and fastens together with a heavy duty zipper. Each one is a different color. Get yours today! ... See More

Here's a part you will never find again! perfect replacement for a damaged blade on your 3/4 size dagger. The blade measures 145mm and 208mm with the tang. The blade is SMF marked and dedicated to ... Read and See More

One original 2nd Class Iron Cross Ribbon - Thin. These are being sold individually. It measures approximately 8 inches long (20.32cm) and 27mm wide (standard width is 33mm). They show minor wear with a pin prick or soil. ... See More

The perfect piece when the job calls for it! We created here a precise wrench for taking apart SA and SS Daggers. I’ve seen people damage pommel nuts using the wrong tool for the job and I’ve even heard of people grinding down wrenches to make the perfect fit. Well you won’t need to do that anymore! ... Read and See More

These are being sold individually, they are all the exact same. We have here a pre-1945 factory unissued standard length 2nd Class Iron Cross Ribbon (Eisernes Kreuz 2. Klasse Band). Each ribbon is constructed out of red, white and black machine embroidered rayon thread. They are each 11 ½ inches (29cm) long by 1 3/16 inches (3cm) wide. This would also be appropriate for an ... Read and See More

For that special someone in your life! Purchasing this $10 Gift Certificate will create a Promotion Code for one of your next order(s). It will appear on the "Sign in" page. There is no shipping cost! They have a 1 year expiry. Handling charges may apply. They are offered in multiple quantities. If purchased during our regular work hours you should ... Read and See More