Helmets

Post-war camo cover with correct internal springs. Fits shell size 64 and smaller. ... See More

Post-war Camo Helmet Cover. ... See More

Reinactor M40 helmet. This unmarked helmet shell is approx. size 62. Interior is what appears to be Luftwaffe blue. It has an unknown liner inside. There are 2 4mm holes drilled below and towards the rear of the helmet. ... See More

The sheet steel construction helmet retains its original smooth, Luftwaffe dark blue/grey paint. The left side of the helmet has a second pattern Luftwaffe eagle decal which is retained about 30%. The right side of the helmet has a national tri-color shield decal has been removed per period orders. All three liner retaining rivets and both inset ventilation bushings are ... Read and See More

Kreigsmarine Stahlhelm. The stamped, sheet steel construction helmet retains a good portion of its period repainted rough textured finish. The left side of the helmet has a golden yellow, Navy eagle shield decal. The decal is 40% intact. All three liner retaining rivets are all intact. The interior of the helmet has an M31 size 59 tan leather liner. Liner is supple ... Read and See More

Stamped heavy sheet steel construction, M35 style helmet with the addition of an embossed horizontal "bead" positioned at the apex of the front and rear visors and crown. The helmet retains a good portion of its original dark blue satin finish with normal scuffs and minor wear. It remains dent-free. There are no decals. All three liner retaining rivets and ... Read and See More

These were the best Luftshutz helmet style IMHO. Single piece lightweight stamped construction with rolled edges. No decal. This helmet retains 95% of it's factory paint with some surface scratches, spills and scuffs but no dents. A good size helmet but I cannot see a size stamp. I would guess 66. The interior of the shell is unmarked. It sports a civilian ... Read and See More

Luftshutz Stahlhelm. Typical three piece stamped construction with rolled edges. This helmet retains 90% of it's factory paint with some surface scratches, soil and scuffs and a few bumps. This sports a decal remaining 94%+ finish. The interior of the shell is correctly marked and sized 58. The WWI style liner system remain intact with all 6 fingers remaining. The chin-strap is broke off.. ... See More

Heavy one piece stamped construction with rolled edges and pressed vents. This helmet retains 95%+ of it's factory paint with some surface scratches. There are no dents. This has no decal. The interior of the shell is serialized "3N370" and Q646, indicating manufacture by F.W. Quist, G.m.b.H. Esslingen. The leather liner is ink stamped "57". It has all 10 ... Read and See More

Single piece lightweight aluminum stamped construction with rolled edges. Decal is retained at 95%. This helmet retains 95% of it's factory paint with some surface scratches and scuffs but no dents. A good size helmet at 68. The interior of the shell is unmarked. It sports a civilian type impregnated cloth linger with all fingers intact. The pigskin chinstrap remains. Stamped to interior ‘ ... Read and See More

Stamped heavy sheet steel construction, M35 style helmet with the addition of an embossed horizontal "bead". The helmet retains a good portion of its original dark blue satin finish with normal scuffs and minor wear. It remains dent-free. There is a nice decal. All three liner retaining rivets and both inset ventilation bushings are all intact. The interior of the ... Read and See More

One piece stamped construction with rolled edges. This helmet retains 95%+ of it's factory paint with some surface scratches and scuffs but no dents. This sports a nice decal still 98%. The interior of the shell is stamped "RL2 39/21. The civilian liner is intact as are all 6 fingers and post-war replacement draw-string. Size in estimated at 56. The chin strap is supple and ... Read and See More

One piece stamped construction with rolled edges. This helmet retains 95%+ of it's factory paint with some surface scratches and scuffs but no dents. This has no decal. The interior of the shell is stamped "RL2 39/21 and nicely decaled. The liner is intact as are all 6 fingers and post-war replacement drawstring. The top pad is lost. Size 56. The chin strap is ... Read and See More

Typical three piece stamped construction with rolled edges. This helmet retains 95%+ of it's factory paint with some surface scratches and scuffs but no dents. This sports a worn decal despite some wear still 90%. The interior of the shell is stamped "RL2 38/28 and nicely decaled. The liner is intact as are all 6 fingers and original drawstring. The top pad is loose. ... Read and See More

The stamped light weight sheet steel construction, civic M34 helmet shell retains most of its black paint. The helmet has two separate, groups of seven, "salt & pepper" ventilation holes positioned on each side of the crown. All 4 of the flat headed liner retaining rivets are intact. The has been Luftshutz decaled, likely a repurposed Police shell that was reissued. The 4 ... Read and See More

Typical three piece stamped construction with rolled edges. This helmet retains 80%+ of it's factory paint with some surface scratches and scuffs but no dents. This sports a decent decal despite some wear. The interior of the shell is stamped "RL2 38/29 and nicely decaled. The liner is ink stamped as to the maker and sized 56. The chin strap is supple and ... Read and See More

Typical light sheet steel construction Luftschutz M38 2 piece "Gladiator" style helmet retains a most of its original, smooth, dark satin blue paint.The front center of the helmet has a Luftschutz emblem decal retained at 60%+. The black detailed, silver decal features stylized spread wings with a central oak-leaf sprig and a canted swastika positioned below a scripted banner, "Luftschutz". The ... Read and See More

Typical one piece stamped construction with rolled edges and vent. This helmet retains 90% of it's factory paint with some surface scratches. There are no dents. This has no decal. The interior of the shell is serialized "DN84", sorry hard to read, and to the back and NS-64. The' (what I believe is impregnated canvas based liner is unmarked as to ... Read and See More

Stamped sheet steel construction, M35 style helmet with the addition of an embossed horizontal "bead" positioned at the apex of the front and rear visors and crown. The helmet retains a good portion of its original dark blue satin finish. The front center of the helmet has no Luftschutz emblem. Was it removed or never there, I don't know. This ... Read and See More

Heavy stamped sheet steel construction, M40 style helmet with the addition of an embossed horizontal "bead" positioned at the apex of the front and rear visors and crown. The helmet retains nearly all of its original dark blue satin finish. The front center of the helmet has a minty Luftschutz emblem decal in place. The black detailed, gold decal features ... Read and See More

Heavy stamped sheet steel construction, M40 style helmet with the addition of an embossed horizontal "bead" positioned at the apex of the front and rear visors and crown. The helmet retains nearly all of its original dark blue satin finish. The front center of the helmet has a Luftschutz emblem decal in place. The black detailed, silver decal features stylized ... Read and See More

Stahlhelm M40 Here we have a combat worn example of a single decal M40 Army helmet by SE. The shell is constructed out of a stamped piece of steel sheet metal that has been green painted. The shell has a folded over edge, embossed air vents and three split rivets. The interior has a steel liner with two square rings. ... Read and See More

Here we have a standard lightweight stamped sheet steel M34 style Fire Police Helmet - No Decals. It continues to retain about 95%+ of its period repainted black paint with wear several scrapes throughout. I can not find any dents. There are no decals. The helmet has std "salt and pepper" ventilation holes positioned on each side of the crown. The ... Read and See More

Here we have a standard light weight stamped sheet steel square dip M34 style Fire Police Helmet. It continues to retain about 90%+ of its original black paint with minor oxidization spotting throughout. The left side of the helmet has a Police decal that is 90% complete, the matching the Swas. decal has been denazified. The helmet has standard "salt and pepper" ... Read and See More

Here we have a standard stamped sheet steel M34 style Fire Police Helmet. It continues to retain about 98%+ of its original black paint with minor scrapes throughout. I can not find any dents. There are no decals. The helmet has std "salt and pepper" ventilation holes positioned on each side of the crown. The interior reverse apron is stamped with ... Read and See More

Here we have a heavy combat stamped sheet steel curved dip "M18" style Fire Police Helmet. It continues to retain about 94%+ of its original black paint with a few odd scratches. There are no decals. The helmet has "salt and pepper" ventilation holes positioned on each side of the crown. All four of the flat headed liner retaining rivets are ... Read and See More

Here we have a standard stamped sheet steel M34 style Fire Police Helmet. It continues to retain about 80%+ of its original green paint several scrapes throughout. I can not find any dents. There are no decals. The helmet has std "salt and pepper" ventilation holes positioned on each side of the crown. The interior is unmarked. All four of the ... Read and See More

The stamped, sheet steel construction helmet retains a good portion of its original rough textured feldgrau factory paint. The decals are 95% removed and I don't know what they originally were. All three liner retaining rivet are intact. The interior of the helmet has a light tan, M31 leather liner with all eight fingers and the original tie string intact. The ... Read and See More

The stamped, sheet steel construction, civic helmet retains most of its green paint. The helmet has two separate screened ventilation holes positioned on each side of the crown. All three of the flat headed liner retaining rivets are intact as are the two chin strap retaining rivets. Complete civic liner and chinstrap system with all ten fingers and original draw-string. ... Read and See More

The stamped aluminum construction, civic M34 "square dip" style helmet retains most of its original blue/gray satin finish paint. There ar esome small dents to the crown and some rubs to the finish. The helmet has two separate, groups of seven, "salt & pepper" ventilation holes positioned on each side of the crown. All four of the flat headed liner ... Read and See More

The stamped steel construction, civic M34 "curved dip" style helmet retains most of its original green finish paint. The left side of the helmet has a, silver bordered, black based, police decal with the second pattern, silver, wreathed police eagle as introduced on July 28TH 1936. The right side of the helmet has a party shield decal. The helmet has two ... Read and See More

The stamped, sheet steel construction, civic M34 helmet retains most of its black paint . The helmet has two separate, groups of seven, "salt & pepper" ventilation holes positioned on each side of the crown. All 7 of the flat headed liner retaining rivets are intact. Complete liner with top pad and chinstrap system. I can not find a size on the shell ... Read and See More

Here we have a nice example of a 1936 pattern Rural Shako by Erel of Berlin. It is constructed out of a rigid black vulcan-fiber body with a green wool covering. The obverse features the correct silvered aluminum cap eagle and cockade. The cockade has about 90% of its original paint still intact. The cap eagle holds both of its aluminum male ... Read and See More